HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
SCHULADUR® PCR GF 45
Manufacturer:
For high surface quality choose upper temperature limits
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
For high surface quality choose upper temperature limits
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANEX® J600
Manufacturer:
Excellent warpage resistance, surface gloss, good mechanical properties, flatness, good surface appearance in large parts
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent warpage resistance, surface gloss, good mechanical properties, flatness, good surface appearance in large parts
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2302 GV1/45
Manufacturer:
Excellent stiffness and good surface appearance
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent stiffness and good surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Zytel® HTN51G35HSLR BK420J
Manufacturer:
heat stabilized, lubricated, hydrolysis resistant, high performance, improved surface appearance, PPA resin
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilized, lubricated, hydrolysis resistant, high performance, improved surface appearance, PPA resin
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_CELANYL® A2 HH D14 NC 1102/2
Manufacturer:
Medium toughened grade, good surface appearance and good processability
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium toughened grade, good surface appearance and good processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_CELANYL® A2 HH D14 NC 1102/2
Manufacturer:
Medium toughened grade, good surface appearance and good processability
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium toughened grade, good surface appearance and good processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2040/100.01 GF40
Manufacturer:
ALTECH
improved surface appearance,heat stabilised,high stiffness,injection moulding grade
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved surface appearance,heat stabilised,high stiffness,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 910_1 GB30 MO2
Manufacturer:
improved sliding / wear,improved surface appearance,low warpage,heat stabilised
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,improved surface appearance,low warpage,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 3240/100 GK25 GF15
Manufacturer:
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 3240/100 GK25 GF15
Manufacturer:
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HAP8920 (PA66+PPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ AG213 (PA66+PPE)-GF30
Manufacturer:
Injection Molding
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8 GF10 MR20 IM PA6-(MD+GF)30
Manufacturer:
heat stabilised, low warpage, improved surface appearance, impact modified
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised, low warpage, improved surface appearance, impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2035/509 GF35 PA6-GF35
Manufacturer:
ALTECH
easy release (demoulding), good flow, improved surface appearance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release (demoulding), good flow, improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANYL® A3 J10 NC 1102/E
Manufacturer:
Medium toughened grade, good surface appearance and good processability
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium toughened grade, good surface appearance and good processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A2 HH J14 BK 9005/2
Manufacturer:
Celanese
Medium toughened grade, good surface appearance and good processability.
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium toughened grade, good surface appearance and good processability.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_CELANYL® A2 HH J14 BK 9005/2
Manufacturer:
Medium toughened grade, good surface appearance and good processability.
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium toughened grade, good surface appearance and good processability.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A2 HH D14 NC 1102/2
Manufacturer:
Medium toughened grade, good surface appearance and good processability
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium toughened grade, good surface appearance and good processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 4240/500 GF15 MR25
Manufacturer:
low warpage,heat stabilised,improved surface appearance
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage,heat stabilised,improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 910/1 GF15 MR25
Manufacturer:
heat stabilised,improved surface appearance,low warpage
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,improved surface appearance,low warpage
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more