HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (306 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
QFC0AI PA610-GF50
制造商:
LNP™ THERMOCOMP™
high modulus, high impact, low dielectric constant, low moisture absorption, good dimensional stability, good chemical resistance
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high modulus, high impact, low dielectric constant, low moisture absorption, good dimensional stability, good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
216FC V40 NC PA610-GF40
制造商:
TECHNYL SAFEC
Viscosity number 145 / * cm³/g
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Viscosity number 145 / * cm³/g
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ECS1003 PA610-GF30 BIO-FED
制造商:
M∙VERA®
Injection Molding
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
S3 GF 30 4 black (3429) PA610-GF30
制造商:
阿克罗米德
Contains renewable resources
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Kalix® 2930 HFFR BK 000 PA610-GF30
制造商:
None
Low Warpage
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® Terra HS1851 PA610-GF20
制造商:
无
Medium viscosity, glass fiber–reinforced, easily demoldable, heat-stabilized polyamide 610 compound for efficient injection molding
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity, glass fiber–reinforced, easily demoldable, heat-stabilized polyamide 610 compound for efficient injection molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
NI-15GF/000 FR GR002
制造商:
Bergamid™
Processing/Physical Characteristics, Mechanical properties, Thermal properties, Electrical properties, Other properties, Processing Recommendation, Characteristics Processing, Regional Availability, Special Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing/Physical Characteristics, Mechanical properties, Thermal properties, Electrical properties, Other properties, Processing Recommendation, Characteristics Processing, Regional Availability, Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HS1851 PA610-GF20
制造商:
None
glass fiber-reinforced, heat-stabilized, medium-viscosity
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
glass fiber-reinforced, heat-stabilized, medium-viscosity
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
NI-10GF/000 PA610-GF10
制造商:
Edgetek™
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
NI-10GF/000 PA610-GF10
制造商:
Edgetek™
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
2701T-30V PA610-CF30
制造商:
None
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound QFP36 (PA610+PTFE)-GF30
制造商:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RADILON MIXLOY D 32CPA100 100 NT (PA610+ABS)-MD
制造商:
拉帝奇集团
High viscosity injection moulding grade
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound QCL349 (PA610+PTFE)-CF20
制造商:
沙特基础工业公司
Wear Resistant, Flame Retardant, Electrically Conductive
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Flame Retardant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RADILON MIXLOY D CPA100K 100 NT (PA610+ABS)-MD
制造商:
None
Heat stabilized
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound QCP36 (PA610+PTFE)-CF30
制造商:
LNP™
Wear Resistant, Electrically Conductive
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
282 B TFE 15 (PA610+PTFE)-CF15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HSKC 106 NT
制造商:
RadiciGroup
Nucleated, lubricated, fast cycling, heat stabilized
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nucleated, lubricated, fast cycling, heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
BioPA610-101
制造商:
Natureplast
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
NI-20GF/15T FR
制造商:
卢布瑞恩
IT / Business Machine
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
IT / Business Machine
Recorded properties are for screening; verify source data and conditions.
Total 306 materials | Scroll down for more