HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (28359 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PP-T20_Hostacom X M2 V05 101936
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 787N E M61399
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 787N E1 D71499
Manufacturer:
Injection Molding Automotive
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 787N E1 G71535
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 482N C12628
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 411N R C11515
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 453N E G13031
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 411N R C11547
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N G22749
Manufacturer:
Injection Molding Non Blooming, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 452N NAT
Manufacturer:
Injection Molding Non Blooming, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 452N C12546
Manufacturer:
Injection Molding Non Blooming, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N G22375
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N R C12507
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N E3 G62514
Manufacturer:
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N E3 C12507
Manufacturer:
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N C12699
Manufacturer:
Injection Molding Non Blooming, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N D42489
Manufacturer:
Injection Molding Non Blooming, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N E1 NAT
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N E1 G62514
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N C12546
Manufacturer:
Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 28359 materials | Scroll down for more