HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (28359 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PP 4920 14116
Manufacturer:
scratch resistant,heat stabilised,easy release (demoulding)
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
scratch resistant,heat stabilised,easy release (demoulding)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP H ECO 4920/570 MR 20
Manufacturer:
heat stabilised
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T19_Hostacom TRC 565N C13034
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hostacom TRC 364N D72792
Manufacturer:
Injection Molding Low Emission, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hostacom TRC 2157N C12509
Manufacturer:
Low Emission, Scratch Resistant, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Emission, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hostacom TRC 364N G82732
Manufacturer:
Injection Molding Low Emission, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hostacom TRC 364N C12752
Manufacturer:
Injection Molding Low Emission, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hostacom XBR 169 G D72680
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hifax M2 U13 C11306
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hostacom TRC 103P G71322
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hifax TRC 277P G14008
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hifax TRC 495P G13076
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_POLIFOR® E25 TR15 UV
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_LOXILENE PP TA15 UV3 HS1 IM3 08064
Manufacturer:
No Characteristics
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15 ITIPLEN IC M20 T15
Manufacturer:
Injection Molding
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15 IC M10 T15
Manufacturer:
Injection Molding
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N NAT
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N C21290
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N D13550
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N G71260
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 28359 materials | Scroll down for more