HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5379 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
WF006NiQ
Manufacturer:
Impact Modified, High Flow, Good Metal Bonding Strength, Good Chemical Resistance
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, High Flow, Good Metal Bonding Strength, Good Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound WF006XXP
Manufacturer:
Notched Impact Strength, Izod Impact Strength, Tensile Modulus, Tensile Strength, Strain at Break, Flexural Modulus, Charpy Impact Strength, Rockwell Hardness, Thermal Conductivity, Vicat Softening Temperature, Burning behav. at thickness, Glow Wire Flammability Index, Glow Wire Ignition Temperature, DTUL, Vicat Temperature, Relative permittivity, Dissipation factor, Volume resistivity, Surface resistivity, Electric strength, Comparative tracking index, Dielectric Strength, Humidity absorption, Density
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Notched Impact Strength, Izod Impact Strength, Tensile Modulus, Tensile Strength, Strain at Break, Flexural Modulus, Charpy Impact Strength, Rockwell Hardness, Thermal Conductivity, Vicat Softening Temperature, Burning behav. at thickness, Glow Wire Flammability Index, Glow Wire Ignition Temperature, DTUL, Vicat Temperature, Relative permittivity, Dissipation factor, Volume resistivity, Surface resistivity, Electric strength, Comparative tracking index, Dielectric Strength, Humidity absorption, Density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ ELCRIN™ WF006JiQ PBT-GF30
Manufacturer:
Low Extractables, Healthcare, Excellent Strength, Stiffness and Dimensional Stability
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Extractables, Healthcare, Excellent Strength, Stiffness and Dimensional Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOTUF™ Compound WF006I - Europe
Manufacturer:
Impact Modified
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ ELCRIN™ WF006NAiQ PBT-GF30
Manufacturer:
high metal bonding strength, good chemical resistance
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high metal bonding strength, good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ ELCRIN™ WF006LiQ PBT-GF30
Manufacturer:
food contact compliant, excellent strength, stiffness and dimensional stability, PCR content
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
food contact compliant, excellent strength, stiffness and dimensional stability, PCR content
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound WF006XXL PBT-GF30
Manufacturer:
Good Mold Release, Heat Stabilized, Low Extractables
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Mold Release, Heat Stabilized, Low Extractables
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WF006LXDiQ PBT-GF30
Manufacturer:
LNP™ ELCRIN™
Excellent strength, stiffness, dimensional stability and heat resistance
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent strength, stiffness, dimensional stability and heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound WF006H
Manufacturer:
No Characteristics
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WF0061iQ PBT-GF30
Manufacturer:
LNP™ ELCRIN™
Non-Chlorinated, Non-Brominated Flame Retardant, Excellent Chemical Resistance
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-Chlorinated, Non-Brominated Flame Retardant, Excellent Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WF006JiQ PBT-GF30
Manufacturer:
LNP™ ELCRIN™
Low Extractables, Healthcare, Excellent Strength, Stiffness and Dimensional Stability
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Extractables, Healthcare, Excellent Strength, Stiffness and Dimensional Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WF0061iQ PBT-GF30
Manufacturer:
LNP™ ELCRIN™
Non-Chlorinated, Non-Brominated Flame Retardant, Excellent Chemical Resistance
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-Chlorinated, Non-Brominated Flame Retardant, Excellent Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KEPEX® 3330GVS PBT-GF30
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KBG1030 PBT-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO GP-5300G PBT-GF30
Manufacturer:
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KBG1030F PBT-GF30
Manufacturer:
Electrical and Electronical
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrical and Electronical
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KEPEX® 3330GF PBT-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO VB-5300GS PBT-GF30
Manufacturer:
Injection Molding
Physical Properties
Density
1.64
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HILOY 420 PBT-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HILOY 432 PBT-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 5379 materials | Scroll down for more