HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-CF30 3010CF30 BK
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30 RTP 285 H
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30 RTP 285 FR
Manufacturer:
Flame retardant
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30_OnForce™ LFT NN-30LCF/002 Grey
Manufacturer:
No Characteristics
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30_CELANYL® A3 CF30 BK 9005
Manufacturer:
Black
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30_CELANYL® A2 CF30 TFS15 BK 9005C
Manufacturer:
Injection molding grade with tribological properties, excellent wear resistance, maximum stiffness
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade with tribological properties, excellent wear resistance, maximum stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30_AKROMID® A3 ICF 30 black 5021
Manufacturer:
Injection Molding Tribologic Grade
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30 black 9005
Manufacturer:
AUROmid
Heat stabilized or stable to heat
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF25 RTP 284
Manufacturer:
Injection Molding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20_Stat-Tech™ NN-20CF000
Manufacturer:
Increased electrical conductivity, High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 910/1.2 CF30
Manufacturer:
electrically conductive,reduced surface resistivity,heat stabilised,high stiffness
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,heat stabilised,high stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30
Manufacturer:
SLOVAMID®66 CF 30 TS
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20 black 3708
Manufacturer:
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20_Stat-Tech™ NN-20CF000 HI2 BK
Manufacturer:
Increased electrical conductivity, High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20 HI black 4139
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20
Manufacturer:
medium viscosity
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium viscosity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20_Vydyne® STAT A 20 FC BK
Manufacturer:
standard flow, high stiffness, strength, electrically conductive
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow, high stiffness, strength, electrically conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20 333 BK
Manufacturer:
RadiciGroup
high mechanical properties, stiffness, dimensional stability, fatigue and creep resistance, higher electrical and thermal conductivity
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high mechanical properties, stiffness, dimensional stability, fatigue and creep resistance, higher electrical and thermal conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20_Stat-Tech™ NN-20CF000 Black
Manufacturer:
Increased electrical conductivity, Heat stabilized or stable to Regional Availability heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Heat stabilized or stable to Regional Availability heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF20
Manufacturer:
SLOVAMID®66 CF 20
Injection Molding
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more