HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCV063
Manufacturer:
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCV063
Manufacturer:
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ WCD815U
Manufacturer:
flexible, non-reinforced extrudable blend, UV stabilized, non-halogenated flame retardant, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, UV stabilized, non-halogenated flame retardant, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD795
Manufacturer:
flexible, non-reinforced extrudable blend, flame retardant, good thermal stability, low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, flame retardant, good thermal stability, low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCA901
Manufacturer:
flexible, non-reinforced extrudable blend, heat deformation performance, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, heat deformation performance, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin V0150B
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS), good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS), good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin SE1X - Americas
Manufacturer:
non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, and hydrolytic stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin PVX1201
Manufacturer:
low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin NHP8000VT3
Manufacturer:
High heat resistance, ultra-thin-wall FR, High tracking resistance performance, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, ultra-thin-wall FR, High tracking resistance performance, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin NHP8000VT3
Manufacturer:
High heat resistance, ultra-thin-wall FR, High tracking resistance performance, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, ultra-thin-wall FR, High tracking resistance performance, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HS2000X - Americas (PPE+PS)-MF17
Manufacturer:
Strong electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Strong electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GFN3L
Manufacturer:
NORYL™
improved hydrolytic stability, very low moisture absorption, high strength, Low warp, low specific gravity, excellent dimensional stability
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved hydrolytic stability, very low moisture absorption, high strength, Low warp, low specific gravity, excellent dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GFN3F - Asia (PPE+PS)-GF30
Manufacturer:
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GFN3F - Americas (PPE+PS)-GF30
Manufacturer:
NORYL™
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GFN2F - Americas (PPE+PS)-GF20
Manufacturer:
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GFN1F - Asia (PPE+PS)-GF10
Manufacturer:
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GFN1F - Americas (PPE+PS)-GF10
Manufacturer:
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANYL® XT1 HH GF35 BK 9005/C PPA-GF35
Manufacturer:
Celanese
High and constant mechanical performance, unaltered even after moisture absorption. Excellent creep behavior and dimensional stability. Extended heat ageing resistance.
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High and constant mechanical performance, unaltered even after moisture absorption. Excellent creep behavior and dimensional stability. Extended heat ageing resistance.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HAM8541H (PMMA+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HAM8541 (PMMA+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more