HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
HAM8580 (PMMA+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Biolloy KG330 (PLA+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Biolloy KH420 (PLA+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PLA-55H
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Biolloy KF1380 (PLA+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KG320
Manufacturer:
Biolloy
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Biolloy KF1380 (PLA+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®UHT
Manufacturer:
High temperature resistance, unfilled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, processing by hot compression molding
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High temperature resistance, unfilled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, processing by hot compression molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP841
Manufacturer:
FLEX NORYL™
Flexible, Non-reinforced, Injection moldable, Low specific gravity, Very low water absorption, Dimensional stability
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible, Non-reinforced, Injection moldable, Low specific gravity, Very low water absorption, Dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCV063
Manufacturer:
Flexible, Non-reinforced, Ultra-thin wall capability, Good scratch abrasion and pinch resistance, High dimensional stability, Low shrinkage and warpage, Very low water absorption, Chemical resistance, Good dielectric strength
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible, Non-reinforced, Ultra-thin wall capability, Good scratch abrasion and pinch resistance, High dimensional stability, Low shrinkage and warpage, Very low water absorption, Chemical resistance, Good dielectric strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCV072
Manufacturer:
FLEX NORYL™
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921A
Manufacturer:
FLEX NORYL™
flexible, non-reinforced, injection moldable, low specific gravity, very low water absorption, dimensional stability
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, injection moldable, low specific gravity, very low water absorption, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCV072
Manufacturer:
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrusion grade, ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, good dielectric strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCP921A
Manufacturer:
FLEX NORYL™
flexible, non-reinforced, injection moldable, low specific gravity, very low water absorption, dimensional stability
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, injection moldable, low specific gravity, very low water absorption, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD895
Manufacturer:
flexible, non-reinforced extrudable blend, non-halogenated flame retardant, superior thermal stability, very low water absorption, robust tensile strength, tensile elongation, low specific gravity
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, non-halogenated flame retardant, superior thermal stability, very low water absorption, robust tensile strength, tensile elongation, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD891B
Manufacturer:
flexible, non-reinforced extrudable blend, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD915
Manufacturer:
Flexible, UV stabilized, non-reinforced, good thermal stability, low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible, UV stabilized, non-reinforced, good thermal stability, low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD895
Manufacturer:
flexible, non-reinforced extrudable blend, non-halogenated flame retardant, superior thermal stability, very low water absorption, robust tensile strength, tensile elongation, low specific gravity
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, non-halogenated flame retardant, superior thermal stability, very low water absorption, robust tensile strength, tensile elongation, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD891B
Manufacturer:
NORYL™
flexible, non-reinforced extrudable blend, flame retardant, 80C end use temperature rating, heat deformation performance, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, flame retardant, 80C end use temperature rating, heat deformation performance, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD891B
Manufacturer:
NORYL™
flexible, non-reinforced extrudable blend, flame retardant, 80C end use temperature rating, heat deformation performance, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, flame retardant, 80C end use temperature rating, heat deformation performance, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more