HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PX5373
Manufacturer:
NORYL™
High heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX5373
Manufacturer:
NORYL™
High heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX5373
Manufacturer:
NORYL™
High heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GTX9500
Manufacturer:
NORYL GTX™
high melt flow, low water absorption, excellent chemical resistance, high heat resistance, dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high melt flow, low water absorption, excellent chemical resistance, high heat resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HOSTAFORM® C 2521 LS
Manufacturer:
high impact toughness, good tracking resistance, good chemical resistance, good hydrolysis resistance, high resistance to thermal and oxidative degradation, stabilized against discoloration and deterioration of mechanical properties from ultraviolet light exposure, natural, black and colored available, low moisture absorption, suitable for injection molding thick-walled, void-free molded parts, extrusion for boards and pipes
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact toughness, good tracking resistance, good chemical resistance, good hydrolysis resistance, high resistance to thermal and oxidative degradation, stabilized against discoloration and deterioration of mechanical properties from ultraviolet light exposure, natural, black and colored available, low moisture absorption, suitable for injection molding thick-walled, void-free molded parts, extrusion for boards and pipes
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PMMA 17OP
Manufacturer:
optical LGP extrusion grade with low foreign matter count and low UV absorbance
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
optical LGP extrusion grade with low foreign matter count and low UV absorbance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PMMA 17OP
Manufacturer:
optical LGP extrusion grade with low foreign matter count and low UV absorbance
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
optical LGP extrusion grade with low foreign matter count and low UV absorbance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®UHT 40G HCM
Manufacturer:
High temperature resistance, graphite filled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, Processing by hot compression molding
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High temperature resistance, graphite filled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, Processing by hot compression molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ACCULOY™ PCA083L (PET+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EX11402R
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EX11402R
Manufacturer:
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FABS 23-D022
Manufacturer:
No Characteristics
Physical Properties
Density
0.923
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
E FABS 23-D006
Manufacturer:
Low Gel, Melt Strength, Tribologic Grade
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Gel, Melt Strength, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FABS 27-D022
Manufacturer:
No Characteristics
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PF 2560
Manufacturer:
average heat resistance, high surface quality, lower water absorption than PF 31, minimal distortion
Physical Properties
Density
0.75
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
average heat resistance, high surface quality, lower water absorption than PF 31, minimal distortion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound EX11402R
Manufacturer:
LNP™
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound EX11402R
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PE-LD_Malen E FABS 27-D022
Manufacturer:
Low Gel, Tribologic Grade
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Gel, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PE-LD_Malen E FABS 23-D006
Manufacturer:
Blown Film Extrusion, Blow Molding
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blown Film Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PE-LD_Malen E FABS 23-D022
Manufacturer:
Low Gel, Tribologic Grade
Physical Properties
Density
0.923
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Gel, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more