HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
MD000IS
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, High Impact, Heat Stabilized
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, High Impact, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MD000IS
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, High Impact, Heat Stabilized
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, High Impact, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Etoma™ ET1201
Manufacturer:
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Etoma™ ET1181
Manufacturer:
Increased electrical conductivity, Flame retardant, Halogen-free
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ICP Tech BioC 50/70/4 IM
Manufacturer:
biocarbon-filled
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
biocarbon-filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ET1103
Manufacturer:
Increased electrical conductivity, High impact or impact
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, High impact or impact
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-CD+GF_LNP™ STAT-KON™ Compound MFD03
Manufacturer:
Electrically Conductive
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CA3842
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CA3839
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HP Tech BioC 50/70/0.3 ET
Manufacturer:
Homopolymer
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 100 SI 2 (PP+SI)
Manufacturer:
Injection Molding
Physical Properties
Density
0.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
100 AR 15 PP-AF15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ML004
Manufacturer:
Wear Resistant
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound ML004S
Manufacturer:
LNP™
Wear Resistant, Heat Stabilized
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound ML004S
Manufacturer:
LNP™
Wear Resistant, Heat Stabilized
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PP 620/8 GF30 PTFE15
Manufacturer:
heat stabilised,improved sliding / wear
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CS 2-5130 NU (PP+PE)-T30
Manufacturer:
INNOPOL®
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Terralene® rPP 3509 (PP+PE-HD)
Manufacturer:
Post-consumer or post-industrial polypropylen blended with biobased high density polyethylene
Physical Properties
Density
0.934
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Post-consumer or post-industrial polypropylen blended with biobased high density polyethylene
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 3402 (PP+PE-HD)
Manufacturer:
The biobased carbon content (BCC) is 33 % (calculated). Suitable for profile extrusion and extrusion blow moulding.
Physical Properties
Density
0.922
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
The biobased carbon content (BCC) is 33 % (calculated). Suitable for profile extrusion and extrusion blow moulding.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Terralene® rPP 3505 (PP+PE-HD)
Manufacturer:
Post-consumer or post-industrial polypropylen blended with biobased high density polyethylene
Physical Properties
Density
0.952
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Post-consumer or post-industrial polypropylen blended with biobased high density polyethylene
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more