HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-GB20
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),high surface gloss
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),high surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20 RTP 200 GB 20 Z
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20
Manufacturer:
SLOVAMID®66
High impact or impact modified
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),high surface gloss
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),high surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20 BK 9005U
Manufacturer:
General purpose grade, high flowability, easy processing, low warpage
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, high flowability, easy processing, low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB25 RTP 202
Manufacturer:
Injection Molding
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 3240100 GK25 GF15
Manufacturer:
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 3240100 GK25 GF15
Manufacturer:
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-(GB+GF)50
Manufacturer:
SLOVAMID®66 GB 30 GF 20
Low Warpage
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB15_DOMAMID 66LVB15H1
Manufacturer:
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB15_BERGAMID® A65 GK15 natur
Manufacturer:
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB15
Manufacturer:
Injection Molding, Other Extrusion, Low Odor
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB+GF30_ALTECH PA6 A 3230/500 GB15 GF15
Manufacturer:
heat stabilised
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF LUVOCOM 1CF30
Manufacturer:
Increased electrical conductivity, Heat stabilized or stable to heat
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB+GF30_CELANYL® A3 H GFB0822 BK 9005U
Manufacturer:
Good flowability, low warpage, long term heat ageing resistance, good surface quality
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good flowability, low warpage, long term heat ageing resistance, good surface quality
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF_TECACOMP® PA66 TRM XS black 4074
Manufacturer:
No Characteristics
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 3230/500 GB15 GF15
Manufacturer:
heat stabilised
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB+GF30 BK001
Manufacturer:
Injection Molding
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF_LUVOCOM 1CF20HS
Manufacturer:
Increased electrical conductivity, Heat stabilized or stable to heat
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-MA30 BK001
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more