HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PP-T20 EMOPLEN A 1308 T2
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-H A 4920/170 MR20
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 Corton 10782 HS UV2_Ltd
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 Corton 10245 HS UV2
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-H A 4920/508 MR20
Manufacturer:
ALTECH
detectable
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
detectable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-H A 4920/180 MR20
Manufacturer:
hot water resistant,good chemical resistance,heat stabilised,easy release (demoulding),good flow
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
hot water resistant,good chemical resistance,heat stabilised,easy release (demoulding),good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-H B 4920/306 MR20
Manufacturer:
ALTECH
highly processing stabilised
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly processing stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4PROP 5C11120
Manufacturer:
Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-H A 4920/108 MR20
Manufacturer:
heat stabilised
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-B B 4920/526 MR20 UV
Manufacturer:
ALTECH
UV stabilised
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-H A 4920/106 MR20
Manufacturer:
heat stabilised
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-B A 4920/500 MR20
Manufacturer:
heat stabilised,easy flow
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-B ECO 4920/570 MR 20
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hostacom TRC 364N D8V689
Manufacturer:
Injection Molding Low Emission, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hostacom TRC 483N C12827
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hostacom TRC 364N C12325
Manufacturer:
Low Emission, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Emission, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TKC 451N
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_INNOPOL® CS 3-9120 SR5 BU
Manufacturer:
Blend of polypropylene block-copolymer and homo-polymer.
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blend of polypropylene block-copolymer and homo-polymer.
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more