HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (4719 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
SE 85A301
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CP-11160
Manufacturer:
Monprene
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE 90A301
Manufacturer:
Good Adhesion, Soft Feel
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CP-17270
Manufacturer:
Monprene
Good UV resistance, Soft Feel
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good UV resistance, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE 60A301
Manufacturer:
Good Adhesion, Soft Feel
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE 65A301
Manufacturer:
Good Adhesion, Soft Feel
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Dryflex® SE 75A301
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
45A301
Manufacturer:
Good Adhesion, Soft Feel
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Dryflex® SE 40A301
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FibraQ TPE 02-20
Manufacturer:
Contains renewable resources
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Technotep® 35-1X-60A
Manufacturer:
General Chemical Resistance, Solvent Resistance, Ozone Resistance
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Chemical Resistance, Solvent Resistance, Ozone Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
35A301
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FibraQ TPE 01-20
Manufacturer:
Compounded formulation containing 20% FibraQ and thermoplastic elasotmer mixed via a Twin-screw extruder. The granulate also include 2% coupling agent. No further additives were used, such as impact modifier or flowability aids, though they could be used to further improve some of the properties.
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Compounded formulation containing 20% FibraQ and thermoplastic elasotmer mixed via a Twin-screw extruder. The granulate also include 2% coupling agent. No further additives were used, such as impact modifier or flowability aids, though they could be used to further improve some of the properties.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Terraprene® Bio SI 9260A C10
Manufacturer:
Contains renewable resources
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FibraQ TPE 01-30
Manufacturer:
Injection Molding
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Sequel 1980-PUV
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Armlen® PP TPE-17-J-80A
Manufacturer:
R&P Polyplastic
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE 30A301
Manufacturer:
Good Adhesion, Soft Feel
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1502
Manufacturer:
PRE-ELEC®
Increased electrical conductivity
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Armlen® PP TPE-10-75A
Manufacturer:
R&P Polyplastic
Copolymer
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 4719 materials | Scroll down for more