HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (4719 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD915
Manufacturer:
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD915
Manufacturer:
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD895
Manufacturer:
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD841U
Manufacturer:
flexible, non-reinforced, UV stabilized, extrudable blend
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, UV stabilized, extrudable blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD841U
Manufacturer:
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD841U
Manufacturer:
flexible, non-reinforced, UV stabilized, extrudable blend
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, UV stabilized, extrudable blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD815U
Manufacturer:
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD801AU
Manufacturer:
flexible, non-reinforced, UV stabilized, extrudable, heat deformation performance
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, UV stabilized, extrudable, heat deformation performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD815U
Manufacturer:
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ WCD815U
Manufacturer:
flexible, non-reinforced extrudable blend, UV stabilized, non-halogenated flame retardant, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, UV stabilized, non-halogenated flame retardant, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD801AU
Manufacturer:
flexible, non-reinforced, UV stabilized, extrudable, heat deformation performance
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, UV stabilized, extrudable, heat deformation performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCA875
Manufacturer:
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCD795
Manufacturer:
flexible, non-reinforced extrudable blend, flame retardant, good thermal stability, low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, flame retardant, good thermal stability, low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCA901
Manufacturer:
flexible, non-reinforced extrudable blend, heat deformation performance, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, heat deformation performance, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3040 CB T (PP+TPE)-GF30
Manufacturer:
Chemically Coupled Reinforcement, Thermal Stability, Homopolymer
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Chemically Coupled Reinforcement, Thermal Stability, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUCEL HI520 (POM+TPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUCEL HI525L (POM+TPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUCEL HI515W (POM+TPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EL302
Manufacturer:
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Deniform 0037 ST (POM+TPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 4719 materials | Scroll down for more