HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5379 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
DURANEX® 330GW
Manufacturer:
Polyplastics
Flame retardant
Physical Properties
Density
1.76
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Crastin® SK645FR NC010
Manufacturer:
Flame retardant, High heat resistance, Excellent electrical insulation, Good colorability, Good melt stability
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High heat resistance, Excellent electrical insulation, Good colorability, Good melt stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURANEX® 3300
Manufacturer:
Polyplastics
Asia Pacific
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Asia Pacific
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Crastin® SK615SF NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Crastin® SK645FR BK851
Manufacturer:
Flame retardant, High heat resistance, Good mechanical properties
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High heat resistance, Good mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Crastin® SK605 BK851
Manufacturer:
lubricated
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
lubricated
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DAFNELOY® VB P06
Manufacturer:
Sirmax S.p.A.
Injection Molding
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANEX® XFR 6842 GF30
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
121 GF 30 natural (005)
Manufacturer:
Heat stabilized
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Crastin® CE15330 BK010
Manufacturer:
Celanese
Molding shrinkage, parallel, Tensile Modulus, Stress at break, Strain at break, Charpy impact strength, Charpy notched impact strength, Melting temperature, Glass transition temperature, Temp. of deflection under load, Burning Behav., Density
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Molding shrinkage, parallel, Tensile Modulus, Stress at break, Strain at break, Charpy impact strength, Charpy notched impact strength, Melting temperature, Glass transition temperature, Temp. of deflection under load, Burning Behav., Density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANEX® 3316HR
Manufacturer:
Flame retardant, Hydrolysis resistant
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANEX® 3315-32
Manufacturer:
Flame retarded, 30% fiberglass reinforced
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retarded, 30% fiberglass reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANEX® 3314
Manufacturer:
Non-exuding
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-exuding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANEX® 3300HR
Manufacturer:
Celanese
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PB40 G30 UF UV
Manufacturer:
Bergadur™
Halogen-free, U.V. stabilized or stable to weather
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Halogen-free, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PB400 G30 H UF
Manufacturer:
Flame retardant, Halogen-free, U.V. stabilized or stable to weather
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PB400 G30 UF UV
Manufacturer:
Flame retardant, Halogen-free, U.V. stabilized or stable to weather
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BR3300-8026 RS NC711
Manufacturer:
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PB40G30
Manufacturer:
general-purpose injection molding grade
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
general-purpose injection molding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PB40 G30 H UF natur
Manufacturer:
Flame retardant, Halogen-free, U.V. stabilized or stable to weather
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Total 5379 materials | Scroll down for more