HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3603 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
1303 TFE 10
制造商:
RTP
Injection Molding
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1303 TFE 15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1303 TFE 20
制造商:
RTP
Injection Molding
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF_LATILUB 80-15T K30
制造商:
None
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF_LATILUB 80-10T K15
制造商:
None
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1387 TFE 10
制造商:
RTP
Injection Molding
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF_DIC-PPS CZL-2000
制造商:
None
Tribologic Grade
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1301-7449
制造商:
LUVOCOM
Increased electrical conductivity, Flame retardant
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
OEL36A - Americas
制造商:
LNP™ STAT-KON™
Wear Resistant, Electrically Conductive
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF30
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF30 RTP 1385 P-1 TFE 15
制造商:
RTP公司
注射成型
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
注射成型
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF30 TF15 black 1061041
制造商:
None
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1385 D TFE 15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF30_RTP 1385 D TFE 15
制造商:
None
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF30
制造商:
None
Injection Molding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF30
制造商:
None
reduced surface resistivity,electrically conductive,improved sliding / wear
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
reduced surface resistivity,electrically conductive,improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
OCP36 - Asia
制造商:
LNP™ LUBRICOMP™
Wear Resistant, Bearing Grade, Electrically Conductive
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Bearing Grade, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPS+PTFE-CF20_RTP 1383 TFE 15
制造商:
None
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1383 P-1 TFE 15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1382 TFE 5
制造商:
RTP
Injection Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 3603 materials | Scroll down for more