HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Softell TKG 317NU NATL
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 300NU BLK
Manufacturer:
Injection Molding Ductile, Scratch Resistant, Soft Feel
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Ductile, Scratch Resistant, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25 Softell TKG 317N C1 C15212
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 300N1 NAT
Manufacturer:
Injection Molding Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 300N G32832
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 2039N E2 C12546
Manufacturer:
Low Warpage, Scratch Resistant, Soft Feel, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Scratch Resistant, Soft Feel, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 300N1 D62819
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25 Softell TKG 300N1 C12334
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25 Softell TKG 300N C13036
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 300N G82732
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25 Softell TKG 2039N C12897
Manufacturer:
Low Warpage, Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25 Softell TKG 300N1 G22843
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 2039N NAT
Manufacturer:
Injection Molding Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 300N C12716
Manufacturer:
Injection Molding Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25 Softell TKG 300N C11498
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 300N G22452
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25 Softell TKG 300N1 C12871
Manufacturer:
U.V. stabilized or stable to weather, Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25_Softell TKG 2039N E2 G22995
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Low Warpage, Scratch Resistant, Soft Feel, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Low Warpage, Scratch Resistant, Soft Feel, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25_Softell TKG 2039N E2 C12507
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Low Warpage, Scratch Resistant, Soft Feel, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Low Warpage, Scratch Resistant, Soft Feel, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF25 POLYFLAM® RPP 2000 E
Manufacturer:
Flame retardant
Physical Properties
Density
0.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more