HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
A3 GF 50 8 natural
Manufacturer:
AKROMID®
Natural
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 GF 50 6 natural (5916)
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 GF 50 3 black
Manufacturer:
AKROMID
Injection Molding Nucleated
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Nucleated
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 GF 50 1 black (2387) PA66-GF50
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AKROMID® A3 GF 50 1 natural (1259) PA66-GF50
Manufacturer:
Akro-Plastic GmbH
Heat stabilized or stable to heat
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 GF 50 1 grey (6569) PA66-GF50
Manufacturer:
No Characteristics
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A28 GF 50 9 EN MCL black
Manufacturer:
Foamable
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Foamable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GF 45 PA66-GF45
Manufacturer:
SLOVAMID®66
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Taromid A 280 H G9 DX0 TR1
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9A22150 UV PA66-GF50
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SCANAMID 66 A33^E F45 PA66-GF45
Manufacturer:
Injection Molding
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA317G9BK10 PA66-GF45
Manufacturer:
Polyram
not specified
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RX99732C
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N6445G-NA PA66-GF45
Manufacturer:
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R543H Natural
Manufacturer:
General purpose, heat-stabilized, high viscosity, glass-filled
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose, heat-stabilized, high viscosity, glass-filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Vydyne® R543H NT PA66-GF43
Manufacturer:
Ascend
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CM3006G-45
Manufacturer:
Amilan
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CM3001G-45
Manufacturer:
Amilan
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NM 6600-44 GF 0001
Manufacturer:
Nymax™
No Characteristics
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Wellamid® GF43-66 XE-N
Manufacturer:
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more