HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (31201 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PE80 (PE-HD)
制造商:
None
No Characteristics
Physical Properties
Density
0.949
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE80 (PE-HD)
制造商:
None
No Characteristics
Physical Properties
Density
0.949
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE100HDC-20M (PE-HD)
制造商:
None
No Characteristics
Physical Properties
Density
0.953
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE100HDC-8M (PE-HD)
制造商:
None
No Characteristics
Physical Properties
Density
0.953
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE2-0400RX
制造商:
Americhe工程化合物
Special Characteristics
Physical Properties
Density
0.954
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD BYNEL™ 40E529
制造商:
None
Barrier Properties, Good Adhesion
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Barrier Properties, Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD_BL5 GM 7746
制造商:
None
Special Characteristics
Physical Properties
Density
0.943
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD AQUATUF® HM-337
制造商:
None
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
0.949
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD Ambitene HV
制造商:
None
No Characteristics
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD_ADVANCENE™ EM-6308-UV
制造商:
None
Low Warpage, Homopolymer
Physical Properties
Density
0.963
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD EM-4810-AAH
制造商:
None
No Characteristics
Physical Properties
Density
0.948
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD_ADVANCENE™ bEE-4906-AAH
制造商:
Altair Engineering GmbH
Thermal Stability, Copolymer, Hexene Copolymer
Physical Properties
Density
0.949
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Copolymer, Hexene Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD 6147
制造商:
中国石化上海高桥公司
No Characteristics
Physical Properties
Density
0.948
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD 55
制造商:
None
No Characteristics
Physical Properties
Density
0.95
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD 52528
制造商:
None
No Characteristics
Physical Properties
Density
0.952
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD-W70 Polywood S3 70 HDPE A1
制造商:
None
Injection Molding, Automotive
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD-MX4 Eltex® B4020LG/34
制造商:
None
High impact or impact modified, Heat stabilized or stable to Packaging heat
Physical Properties
Density
0.952
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to Packaging heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD-T10 RTP 731
制造商:
None
No Characteristics
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD-W+Z55 plasticWOOD Compound 104/3
制造商:
None
High water resistance, good balance between extrusion output and mechanical properties
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High water resistance, good balance between extrusion output and mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-HD-T30 RTP 732
制造商:
RTP公司
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 31201 materials | Scroll down for more