HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1334 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
83 CP/80 PA12-X
制造商:
None
High impact or impact modified, Thermally Conductive
Physical Properties
Density
2.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DuraForm® ProX® HST Composite PA12-X
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
3020 CX1
制造商:
优贝
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA 620-MF PA12-MF
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DAIAMID® L1965J PA12-P
制造商:
None
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DuraForm® HST Composite PA12-X
制造商:
None
Additive Manufacturing
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Additive Manufacturing
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA 620-MF PA12-MF
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® X7293 BK 9.7507 PA12-I
制造商:
埃文斯克运营公司
High viscosity, plasticized, impact modified, heat- and light-stabilized
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity, plasticized, impact modified, heat- and light-stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® X7293 PA12-I
制造商:
Evonik Operations GmbH
High viscosity, plasticized, impact modified, heat- and light-stabilized
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity, plasticized, impact modified, heat- and light-stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® X7393 NC PA12-I
制造商:
Evonik Operations GmbH
High viscosity, plasticized, impact modified, heat- and light stabilized
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity, plasticized, impact modified, heat- and light stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® X7293 PA12-I
制造商:
Evonik Operations GmbH
high viscosity, plasticized, impact modified, heat- and light-stabilized
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high viscosity, plasticized, impact modified, heat- and light-stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® L2123 PA12-I
制造商:
Evonik Operations GmbH
High melt viscosity, optimized cold temperature impact resistance, good dimensional control during pipe extrusion, exceptional impact strength, low coefficient of friction, good chemical resistance
Physical Properties
Density
0.86
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High melt viscosity, optimized cold temperature impact resistance, good dimensional control during pipe extrusion, exceptional impact strength, low coefficient of friction, good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® L2123 PA12-I
制造商:
埃文基运营公司
高熔体粘度,优化的低温冲击强度,良好的尺寸控制
Physical Properties
Density
0.86
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
高熔体粘度,优化的低温冲击强度,良好的尺寸控制
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® L-R7-MHI BK PA12-I
制造商:
欧文斯亿克运营公司
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® L-R7-MHI BK PA12-I
制造商:
欧文斯克运营公司
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® L-R3-MHI BK PA12-I
制造商:
埃文凯克
Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VESTAMID® L-R3-MHI BK PA12-I
制造商:
埃文凯克运营公司
Plasticized, impact resistance, heat and light-stabilized, antistatic, fast and even form filling
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Plasticized, impact resistance, heat and light-stabilized, antistatic, fast and even form filling
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
MA 4411 BLACK
制造商:
Rilsamid®
Profile Extrusion, Other Extrusion, High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or Delivery form stable to heat
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Profile Extrusion, Other Extrusion, High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or Delivery form stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
AESN BLACK P202 T6L
制造商:
Rilsamid®
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Grilamid LV-65H SST natural
制造商:
EMS-GRIVORY
Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Total 1334 materials | Scroll down for more