HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8369 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
ABS A 1000/739 AS
制造商:
ALTECH
antistatic,easy release (demoulding),injection moulding grade
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
antistatic,easy release (demoulding),injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS M22UV
制造商:
None
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS M22
制造商:
None
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000/627 UV
制造商:
ALTECH
high heat stabilised,good flow,processing stabilised,injection moulding grade,low emission,UV stabilised
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,good flow,processing stabilised,injection moulding grade,low emission,UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000/587
制造商:
阿尔泰克
注塑级,也适用于挤出
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
注塑级,也适用于挤出
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000566
制造商:
ALTECH
high heat stabilised,low gloss
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,low gloss
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000/106
制造商:
ALTECH
easy flow,processing stabilised,injection moulding grade
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow,processing stabilised,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000/568.03
制造商:
ALTECH
slip agent
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
slip agent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000/326 ABS
制造商:
None
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000/227 UV ABS
制造商:
None
UV stabilised
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000106 YL1248-05LS
制造商:
阿尔泰克
easy flow,injection moulding grade,laser etchable (dark etching)
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow,injection moulding grade,laser etchable (dark etching)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000/106 GY1116-20
制造商:
ALTECH
easy flow,injection moulding grade
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000106 GY1117-20
制造商:
ALTECH
easy flow,injection moulding grade
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS A 1000100
制造商:
ALTECH
medium viscosity
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium viscosity
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS-M_Ltd._20260706_1524
制造商:
ABS-M
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS LG703W
制造商:
LG化学
Heat stabilized or stable to heat
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS C7513 90/17 ABS
制造商:
None
Copolymer
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS C7400 70/11 ABS
制造商:
None
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS C7400 90/04 ABS
制造商:
None
Copolymer
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS C7500 70/35 ABS
制造商:
None
Copolymer
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 8369 materials | Scroll down for more