HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3603 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
ALCOM PBT 700/1 PTFE20
制造商:
None
improved sliding / wear, heat stabilised
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear, heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUVOCOM 1850-7783 VP (PBT+PTFE)-GF
制造商:
None
Processing Recommendation Injection Molding
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing Recommendation Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound WL003
制造商:
LNP™
Wear Resistant
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRILON 432 (PBT+PTFE)-GF
制造商:
None
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUVOCOM 1850/GF/30/TF/13/SI/2 (PBT+PTFE)-GF
制造商:
None
No Characteristics
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM PBT 700/12 PTFE10
制造商:
None
improved sliding / wear,heat stabilised,good flow
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DURANEX® CTN7133N/B (PBT+PTFE)-(MD+GF)33
制造商:
None
Flame retardant
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LATILUB 75/4-20T (PBT+PTFE)
制造商:
None
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUVOCOM 1850/GF/30/TF/13/SI/2/BK (PBT+PTFE)-GF
制造商:
None
No Characteristics
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DURANEX® 2002K (PBT+PTFE)
制造商:
None
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LATILUB 75/4-05T G/30-V0 (PBT+PTFE)-GF
制造商:
None
No Characteristics
Physical Properties
Density
1.64
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT/6G/3L1 (PBT+PTFE)-GF30
制造商:
威腾博
Processing/Physical Characteristics Value Unit Test Standard ISO Data
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing/Physical Characteristics Value Unit Test Standard ISO Data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT 700/1 GF30 PTFE15
制造商:
None
improved sliding / wear,high stiffness
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1007 TFE 10 (PBT+PTFE)-GF40
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1005 TFE 20 (PBT+PTFE)-GF30
制造商:
RTP
Injection Molding
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1005 TFE 5 (PBT+PTFE)-GF30
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1003 TFE 15 (PBT+PTFE)-GF20
制造商:
RTP
Injection Molding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound WFL369 (PBT+PTFE)-GF30
制造商:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.78
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1005 TFE 15 (PBT+PTFE)-GF30
制造商:
RTP
Injection Molding
Physical Properties
Density
1.64
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1005 TFE 10 (PBT+PTFE)-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 3603 materials | Scroll down for more