HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25706 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA6-MD15
制造商:
None
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-MD20_CELANYL® B3 D05 K20 GY 7040E
制造商:
塞拉尼斯
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-MD20
制造商:
None
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 A 4012/500 MR12
制造商:
阿尔泰克
heat stabilised, low warpage
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised, low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-MD+GF_CELANYL® B3 W MGF2010 NC 1102
制造商:
赛奥宁
Low Warpage
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-MD+GF_CELANYL® B3 W MGF2010 NC 1102
制造商:
赛奥宁
Low Warpage
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-MD+GF_CELANYL® B3 MGF2515 BK 9005/N
制造商:
塞拉尼斯
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 900/8.4 GF10 MR20 NC0001-00 PA6-(MD+GF)
制造商:
None
heat stabilised,easy flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 900/5.2 CF/MR25 PA6-(MD+CF)25
制造商:
None
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 900/8 GF10 MR20 SV1285-04MCF PA6-(MD+GF)
制造商:
None
low warpage, heat stabilised, flow line optimised, low tendency to flow lines
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage, heat stabilised, flow line optimised, low tendency to flow lines
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-(MD+GF)40
制造商:
None
Heat stabilized
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 900/8 GF10 MR20 IM PA6-(MD+GF)30
制造商:
None
heat stabilised, low warpage, improved surface appearance, impact modified
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised, low warpage, improved surface appearance, impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 900/8.4 GF10 MR20 BK0002-00 PA6-(MD+GF)
制造商:
None
heat stabilised,easy flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 900/5 CF/MR BK12-966 PA6-(MD+CF)25
制造商:
None
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-L20_Polywood VIS 20 PA6 A1
制造商:
None
Contains renewable resources
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-I-GF40 Zytel® 73G40T BK416
制造商:
None
High mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-I-GF33_Akulon® K224-LPG6U
制造商:
None
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-I-GF30 TC
制造商:
None
High impact or impact modified
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 ECO 2030/219 GF30 IM
制造商:
None
impact modified,injection moulding grade,heat stabilised,contains recycled material
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,injection moulding grade,heat stabilised,contains recycled material
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6-I-GF20 DOMO Engineering Plastics
制造商:
None
improved impact resistance, for injection moulding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved impact resistance, for injection moulding
Recorded properties are for screening; verify source data and conditions.
Total 25706 materials | Scroll down for more