HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3603 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
1005 TFE 15 Z (PBT+PTFE)-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT 700/1 GF30 TF15 SI2 (PBT+PTFE)-GF30
制造商:
None
improved sliding / wear, heat stabilised, high stiffness
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear, heat stabilised, high stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1005 TFE 15 FR A (PBT+PTFE)-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.77
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DURANEX® 7400F (PBT+PTFE)-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT 700/8 GF15 PTFE15 (PBT+PTFE)-GF15
制造商:
None
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1001 TFE 15 Z (PBT+PTFE)-GF10
制造商:
RTP公司
Injection Molding, Food contact, Food approval FDA 21 CFR
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Food contact, Food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1002 TFE 15 Z (PBT+PTFE)-GF15
制造商:
RTP公司
Injection Molding, Food contact, Food approval FDA 21 CFR
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Food contact, Food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound WFL34H
制造商:
沙特基础工业公司
Wear Resistant, Healthcare
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Denilub B 20G 3TF (PBT+PTFE)-GF20
制造商:
None
Lubricants
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound WBL36L - Americas (PBT+PTFE)-GB30
制造商:
LNP™
Wear Resistant, Low Extractables
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Low Extractables
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1002 TFE 15 (PBT+PTFE)-GF15
制造商:
None
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1002 TFE 10 (PBT+PTFE)-GF15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUVOCOM 1850-7581 (PBT+PTFE)-CF
制造商:
None
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM PBT 700/1.5 HR GF15 PTFE15
制造商:
None
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUVOCOM 1850-7784 (PBT+PTFE)-(GF+GB)
制造商:
None
No Characteristics
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1002 TFE 15 SI 2 (PBT+PTFE)-GF15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1001 GB 15 TFE 5 (PBT+PTFE)-GB15
制造商:
None
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1085 TFE 15 (PBT+PTFE)-CF30
制造商:
RTP
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound WCL36 (PBT+PTFE)-CF30
制造商:
LNP™
Electrically Conductive, Wear Resistant
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
WAL34
制造商:
LNP™ LUBRICOMP™
Internally Lubricated, Wear Resistant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Total 3603 materials | Scroll down for more