HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
FXD121R
Manufacturer:
Mold release, Transparent/Translucent, Low Viscosity grade for Light Diffusion Special Effects
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mold release, Transparent/Translucent, Low Viscosity grade for Light Diffusion Special Effects
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DMX1214
Manufacturer:
LEXAN™
Improved Scratch Resistance, Improved Dielectric Performance
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Scratch Resistance, Improved Dielectric Performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FXD121R
Manufacturer:
Mold release, Transparent/Translucent, Low Viscosity grade for Light Diffusion Special Effects
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mold release, Transparent/Translucent, Low Viscosity grade for Light Diffusion Special Effects
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SLDM2005
Manufacturer:
LEXAN™
Permanently Anti-Static
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Permanently Anti-Static
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SLDM2005
Manufacturer:
LEXAN™
Permanently Anti-Static
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Permanently Anti-Static
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FXD123R
Manufacturer:
UV stabilized
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DMX1214
Manufacturer:
LEXAN™
Improved Scratch Resistance, Improved Dielectric Performance
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Scratch Resistance, Improved Dielectric Performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LEXAN™ EXL Filament AMHI240F Black
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BFL4000U
Manufacturer:
LEXAN™
unfilled, flame retardant grade with high flow, UV stabilized, light reflective
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unfilled, flame retardant grade with high flow, UV stabilized, light reflective
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BFL4000U
Manufacturer:
LEXAN™
injection moldable, non-chlorinated/brominated, unfilled, flame retardant grade with high flow, UV stabilized, light reflective
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
injection moldable, non-chlorinated/brominated, unfilled, flame retardant grade with high flow, UV stabilized, light reflective
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BFL4000U
Manufacturer:
LEXAN™
injection moldable, non-chlorinated/brominated, unfilled, flame retardant grade with high flow, UV stabilized, light reflective
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
injection moldable, non-chlorinated/brominated, unfilled, flame retardant grade with high flow, UV stabilized, light reflective
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer XHT4141
Manufacturer:
LEXAN™
High flow, high heat
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, high heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer XHT5146
Manufacturer:
LEXAN™
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XHT4143
Manufacturer:
LEXAN™
high flow, UV stabilized, high heat
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, UV stabilized, high heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XHT4143T
Manufacturer:
high flow, UV stabilized, high heat
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, UV stabilized, high heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LEXAN™ EXL Filament AMHI240F Black
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XHT4143T
Manufacturer:
high flow, UV stabilized, high heat
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, UV stabilized, high heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XHT4143
Manufacturer:
LEXAN™
high flow, UV stabilized, high heat
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, UV stabilized, high heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer XHT4143
Manufacturer:
High flow, UV stabilized, high heat
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, UV stabilized, high heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer XHT4141
Manufacturer:
LEXAN™
High flow, high heat
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, high heat
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more