HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2205 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ESD-PPS
Manufacturer:
3DXSTAT™
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
E-13819
Manufacturer:
No Characteristics
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 1400 R-5500
Manufacturer:
No Characteristics
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1400 R-5800
Manufacturer:
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 1400 R-5000
Manufacturer:
Transparent
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-5800 NT
Manufacturer:
Medical Grade, Biocompatibility ISO 10993, Flame retardant, Heat stabilized or stable to heat, Transparent, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medical Grade, Biocompatibility ISO 10993, Flame retardant, Heat stabilized or stable to heat, Transparent, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-7700
Manufacturer:
Profile Extrusion, Sheet Extrusion, Thermoforming
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Profile Extrusion, Sheet Extrusion, Thermoforming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 1400 R-5100
Manufacturer:
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-7300
Manufacturer:
Flame retardant, High impact or impact modified
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R-5100 RD1018
Manufacturer:
Radel®
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-5500 GY1137
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Electrical and Electronical, General Purpose, Medical
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Electrical and Electronical, General Purpose, Medical
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R-5500 VT2582
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Electrical and Electronical, General Purpose, Medical Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Electrical and Electronical, General Purpose, Medical Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R-5500 NT
Manufacturer:
Radel®
Flame retardant, Heat stabilized or stable to heat, Transparent, Electrical and Electronical, General Purpose, Medical Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Transparent, Electrical and Electronical, General Purpose, Medical Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-5100 NT15
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-5500 NT15
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Electrical and Electronical, General Purpose, Medical Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Electrical and Electronical, General Purpose, Medical Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-5500 OR1145
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Electrical and Electronical, General Purpose, Medical
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Electrical and Electronical, General Purpose, Medical
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R-5000 NT
Manufacturer:
Radel®
Acid Resistance, Alkali Resistance, General Chemical Resistance, Extrusion, Blow Molding, Thermoforming, Environmental Stress Crack Resistance, Hydrolytically Stable, Radiation Resistance
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Acid Resistance, Alkali Resistance, General Chemical Resistance, Extrusion, Blow Molding, Thermoforming, Environmental Stress Crack Resistance, Hydrolytically Stable, Radiation Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-5100 GN1007
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Radel® R-5100 BK937
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9X02694J
Manufacturer:
High Heat Resistance, Healthcare, Low Extractable
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat Resistance, Healthcare, Low Extractable
Recorded properties are for screening; verify source data and conditions.
Total 2205 materials | Scroll down for more