HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11211 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA66-MD15_CELANYL® A3 D05 K15 GY 7040E
制造商:
赛兰尼斯
Heat stabilized or stable to heat, Low Warpage
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-MD15_CELANYL® A3 D05 K15 BK 9004EUV
制造商:
赛兰尼斯
U.V. stabilized or stable to weather
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 A 4030/500 MR30
制造商:
None
high heat stabilised,high stiffness,low warpage,good flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,high stiffness,low warpage,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-MD30
制造商:
None
Flame retardant
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 A 4240/500 GF15 MR25
制造商:
None
low warpage,heat stabilised,improved surface appearance
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage,heat stabilised,improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-MD30_DOMAMID 66M30H1
制造商:
None
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-MD20
制造商:
安费诺公司
impact modified, high heat stabilized
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, high heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-MD25_DOMAMID 66M25
制造商:
DOMO工程塑料
No Characteristics
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-MD20
制造商:
安费诺公司
impact modified, high heat stabilized
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, high heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 910/1 GF15 MR25
制造商:
None
heat stabilised,improved surface appearance,low warpage
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,improved surface appearance,low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-I-MD15_ALTECH PA66 ECO 4015120 MR15 IM
制造商:
无
impact modified,heat stabilised,easy release (demoulding),injection moulding grade
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,heat stabilised,easy release (demoulding),injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-I-MX40
制造商:
None
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-I
制造商:
None
High impact or impact modified
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-I-GF25_Akulon® S223-HPG5
制造商:
恩瓦洛尔
Impact Modified, Heat Stabilized, Resistant to Oil and Grease
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, Heat Stabilized, Resistant to Oil and Grease
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 A 2030/310 GF30 IM
制造商:
ALTECH
heat stabilised,impact modified
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 ECO 2030/510 GF30 IM
制造商:
ALTECH
heat stabilised,injection moulding grade,easy release (demoulding),impact modified
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,injection moulding grade,easy release (demoulding),impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 A 2030516 GF30 IM
制造商:
ALTECH
heat stabilised,impact modified,high surface gloss
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,impact modified,high surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-I-GF15
制造商:
None
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 ECO 2030/310 GF30 IM
制造商:
None
high heat stabilised,impact modified
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 A 2015310 GF15 IM
制造商:
ALTECH
impact modified,heat stabilised,easy release (demoulding)
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,heat stabilised,easy release (demoulding)
Recorded properties are for screening; verify source data and conditions.
Total 11211 materials | Scroll down for more