HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3603 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PBT 7001 GF30 PTFE15_KG
制造商:
ALCOM
improved sliding / wear,high stiffness
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound WFP36
制造商:
LNP™
Wear Resistant
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT 700/1.5 HR GF15 PTFE15
制造商:
None
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT+PTFE-GB30 LNP™ LUBRICOMP™ Compound WBL36L
制造商:
沙特基础工业公司
Wear Resistant, Low Extractables
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Low Extractables
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT 700/8 GF15 PTFE15
制造商:
ALCOM
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT 700/1 GF20 PTFE15
制造商:
ALCOM
improved sliding / wear,high stiffness
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound WAL34 - Americas
制造商:
LNP™
Internally Lubricated, Wear Resistant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT 700/1.1 CF20 PTFE15
制造商:
None
electrically conductive,reduced surface resistivity,improved sliding / wear,heat stabilised
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1084 TFE 15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
X 640/352
制造商:
None
Injection Molding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Torlon® 4203L
制造商:
Syensqo
Creep Resistance, Ductile, Fatigue Resistance, Chemical Resistance
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Ductile, Fatigue Resistance, Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Torlon® 4275 (PAI+PTFE)-CD
制造商:
None
Creep Resistance, Tribologic Grade
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA9T GF30 TF15 H
制造商:
Badamid
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 910/1 GF30 PTFE15 SI2
制造商:
None
improved sliding / wear,heat stabilised
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
GFX1743-N1 (PTFE) (PA666+PTFE)-GF43
制造商:
威尔曼先进材料
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
A70G30TF15
制造商:
BERGAMID
PTFE, different contents possible, good surface finish
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
PTFE, different contents possible, good surface finish
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_CELANYL® A3 H GF15 TP05S BK 9005Z
制造商:
塞拉尼斯
Lubricated grade with improved wear resistance, PTFE free
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricated grade with improved wear resistance, PTFE free
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LATILUB 66-20ST (PA66+SI+PTFE)
制造商:
LATI 工业热塑性塑料 S.p.A.
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LATILUB 67-10STE21 G/20 (PA66+SI+PTFE)-GF
制造商:
None
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Wellamid® NY1820-BK1 (PTFE) (PA66+PTFE)
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 3603 materials | Scroll down for more