HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3603 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
RTP 201 D TFE 10 (PA612+PTFE)-GF10
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound IBP34 (PA612+PTFE)-GB20
制造商:
None
Wear Resistant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
200 D AR 10 TFE 5 (PA612+PTFE)-AF10
制造商:
None
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA612+PTFE-GF15_RTP 202 D TFE 15
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
200 D AR 10 TFE 15 (PA612+PTFE)-AF10
制造商:
None
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
200 D AR 10 TFE 10 (PA612+PTFE)-AF10
制造商:
None
No Characteristics
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 201 D TFE 5 (PA612+PTFE)-GF10
制造商:
None
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
282 D TFE 15 (PA612+PTFE)-CF15
制造商:
None
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA612+PTFE-GF15_RTP 202 D HS TFE 15
制造商:
None
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
283 D TFE 10 SI 2 (PA612+PTFE+SI)-CF20
制造商:
None
Injection Molding
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
283 D TFE 15 SI 2 (PA612+PTFE+SI)-CF20
制造商:
RTP
Injection Molding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
205 D TFE 13 SI 2 (PA612+PTFE+SI)-GF30
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
285 D TFE 13 SI 2 (PA612+PTFE+SI)-CF30
制造商:
None
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound QFP36 (PA610+PTFE)-GF30
制造商:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound QCL349 (PA610+PTFE)-CF20
制造商:
沙特基础工业公司
Wear Resistant, Flame Retardant, Electrically Conductive
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Flame Retardant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound QCP36 (PA610+PTFE)-CF30
制造商:
LNP™
Wear Resistant, Electrically Conductive
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
282 B TFE 15 (PA610+PTFE)-CF15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
66 PTFE 20 HS
制造商:
舒尔阿米德
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66_SCHULAMID® 66 PTFE 20 HS
制造商:
朗盛工业公司
Injection Molding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RADILON A FL2 100 NT
制造商:
RadiciGroup
Tribologic Grade
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Total 3603 materials | Scroll down for more