HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11211 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA66-GF40_CELANYL® A4 HH GF40 BK 9005H
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40 COMTUF 630
制造商:
朗盛工业公司
High impact or impact modified
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_CELANYL® A3 J GF40 NC 1102
制造商:
赛兰尼斯
Injection molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40
制造商:
ECONAMID FL 66G40
Injection Molding
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_DOMAMID 66G40H1
制造商:
DOMO工程塑料
Heat stabilized or stable to heat
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_CELANYL® A3 HH GF40 NC 1102HA
制造商:
塞拉尼斯
Injection Molding Heat stabilized or stable to heat
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_CELANYL® A3 J GF40 BK 9005U
制造商:
Celanese
No Characteristics
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40 EcoLon® GF2040-BK1
制造商:
None
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_CELANYL® A2 HH GF40 NC 11021
制造商:
Celanese
Natural Color
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_AKROMID® A3 GF 40 natural 1258
制造商:
None
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40 black (2430)
制造商:
None
Injection Molding Automotive
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_AKROMID® A3 GF 40 1 LT black 5709
制造商:
None
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40
制造商:
Staramide AG8
Injection Molding, Low Odor
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40 A3 GF 40 1 black 2386
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_AKROMID® A3 GF 40 8 black 6522
制造商:
阿克罗-塑料有限公司
Injection Molding, Food contact
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Food contact
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40 black (2430)
制造商:
None
Injection Molding Automotive
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 A 2040100 GF40
制造商:
None
heat stabilised,easy release (demoulding),high surface gloss
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),high surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_AKROMID® A3 GF 40 1 black 2386
制造商:
阿科塑料有限公司
Heat stabilized or stable to heat
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 A 2040100.01 GF40
制造商:
None
improved surface appearance,heat stabilised,high stiffness,injection moulding grade
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved surface appearance,heat stabilised,high stiffness,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF40_AKROMID® A28 GF 40 1 natural
制造商:
阿克罗-塑料公司
Heat stabilized or stable to heat
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 11211 materials | Scroll down for more