HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-MD20_CELANYL® B3 D05 K20 GY 7040E
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD20
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 4012/500 MR12
Manufacturer:
heat stabilised, low warpage
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised, low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2010 NC 1102
Manufacturer:
Low Warpage
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2010 NC 1102
Manufacturer:
Low Warpage
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 MGF2515 BK 9005/N
Manufacturer:
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8.4 GF10 MR20 NC0001-00 PA6-(MD+GF)
Manufacturer:
heat stabilised,easy flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/5.2 CF/MR25 PA6-(MD+CF)25
Manufacturer:
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8 GF10 MR20 SV1285-04MCF PA6-(MD+GF)
Manufacturer:
low warpage, heat stabilised, flow line optimised, low tendency to flow lines
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage, heat stabilised, flow line optimised, low tendency to flow lines
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-(MD+GF)40
Manufacturer:
Heat stabilized
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8 GF10 MR20 IM PA6-(MD+GF)30
Manufacturer:
heat stabilised, low warpage, improved surface appearance, impact modified
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised, low warpage, improved surface appearance, impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8.4 GF10 MR20 BK0002-00 PA6-(MD+GF)
Manufacturer:
heat stabilised,easy flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/5 CF/MR BK12-966 PA6-(MD+CF)25
Manufacturer:
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-L20_Polywood VIS 20 PA6 A1
Manufacturer:
Contains renewable resources
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I-GF40 Zytel® 73G40T BK416
Manufacturer:
High mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I-GF33_Akulon® K224-LPG6U
Manufacturer:
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I-GF30 TC
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 ECO 2030/219 GF30 IM
Manufacturer:
impact modified,injection moulding grade,heat stabilised,contains recycled material
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,injection moulding grade,heat stabilised,contains recycled material
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I-GF20 DOMO Engineering Plastics
Manufacturer:
improved impact resistance, for injection moulding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved impact resistance, for injection moulding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2030/319 GF30 IM
Manufacturer:
easy release (demoulding),elastomer modified,high toughness,heat stabilised
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release (demoulding),elastomer modified,high toughness,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more