HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2768 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
KCA9341NH (PC+PET)
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® AR207 LG (PC+PET)
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LONOY 2100 LT (PC+PET)
Manufacturer:
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® UT305 (PC+PET)
Manufacturer:
high heat resistance, good chemical resistance and flowability
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat resistance, good chemical resistance and flowability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LONOY 2200 HT (PC+PET)
Manufacturer:
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® UT235 M RE (PC+PET)-T15
Manufacturer:
easy flow, low coefficient of linear thermal expansion, easy release, injection molding
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow, low coefficient of linear thermal expansion, easy release, injection molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ColorRx® PCT-1500RX (PC+PET)
Manufacturer:
Special Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ColorFast® PCT1000 (PC+PET)
Manufacturer:
Injection Molding Low Odor
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ColorRx® PCT-1200RX (PC+PET)
Manufacturer:
Special Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® UT215 M (PC+PET)-T5
Manufacturer:
easy flow, easy release, good impact strength
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow, easy release, good impact strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PCTM (PC/PET) (PC+PET)
Manufacturer:
BESTPOLUX
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
COMTUF 410 (PC+PET)
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® UT235 M (PC+PET)-T15
Manufacturer:
easy flow, low coefficient of linear thermal expansion, easy release, injection molding, exceptional dimensional stability
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow, low coefficient of linear thermal expansion, easy release, injection molding, exceptional dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® UT408 (PC+PET)-I
Manufacturer:
good impact strength, dimensional stability and chemical resistance
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good impact strength, dimensional stability and chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AUROblend® PC+PET HI black 9005
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® UT203 (PC+PET)-I
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® UT250 (PC+PET)-I
Manufacturer:
impact modified, easy release, injection molding
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, easy release, injection molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® EL703 (PC+PET)-I FR(16+42)
Manufacturer:
Good impact strength, dimensional stability and chemical resistance
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good impact strength, dimensional stability and chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makroblend® EL700 (PC+PET)-I FR(16+42)
Manufacturer:
unreinforced flame-retardant impact modified
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced flame-retardant impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VYLOPET® CA5310 (PC+PBT)
Manufacturer:
No Characteristics
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 2768 materials | Scroll down for more