HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
N850
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N802
Manufacturer:
NORYL™
High flow, good dimensional stability, low specific gravity
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, good dimensional stability, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin N1250
Manufacturer:
thin wall FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
thin wall FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N190X
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N190
Manufacturer:
NORYL™
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1900
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1900
Manufacturer:
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1250
Manufacturer:
FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1900
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N190X
Manufacturer:
NORYL™
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytical stability
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytical stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1250
Manufacturer:
Non-reinforced blend, Thin wall FR capability, Enhanced dimensional stability, High heat resistance, Low moisture absorption, Good electrical insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, Thin wall FR capability, Enhanced dimensional stability, High heat resistance, Low moisture absorption, Good electrical insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin N190
Manufacturer:
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1150
Manufacturer:
NORYL™
heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1250
Manufacturer:
FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N190
Manufacturer:
NORYL™
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin N1150
Manufacturer:
Heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1900
Manufacturer:
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1250
Manufacturer:
Non-reinforced blend, Thin wall FR capability, Enhanced dimensional stability, High heat resistance, Low moisture absorption, Good electrical insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, Thin wall FR capability, Enhanced dimensional stability, High heat resistance, Low moisture absorption, Good electrical insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1150
Manufacturer:
NORYL™
heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1150
Manufacturer:
NORYL™
heat resistance, good impact resistance, low specific gravity, dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat resistance, good impact resistance, low specific gravity, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more