HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (29 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
ABS/PA 320 GF15 FR UV (ABS+PA*)-GF15
制造商:
巴达拉克
耐热, 阻燃, 抗紫外线
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
耐热, 阻燃, 抗紫外线
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 320 GF8 UV (ABS+PA*)-GF8
制造商:
巴达拉克
U.V. stabilized or stable to weather
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 310 TM-Z3 UV
制造商:
巴达拉克
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 320 TM-Z2
制造商:
Badalac
High impact or impact modified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 320 GF15 FR UV
制造商:
Badalac
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 320 GF20 UV
制造商:
Badalac
U.V. stabilized or stable to weather
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 320 GF30 UV
制造商:
巴达拉克
U.V. stabilized or stable to weather
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 320 GF8 UV
制造商:
Badalac
Injection Molding
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS_PA6SCHULABLEND_ _ABS_PA_ M_MK_Industries_20260706_1525
制造商:
None
high impact strength and chemical resistance
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength and chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Badalac® ABS/PA 320 TM-Z2 (ABS+PA*)
制造商:
None
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
SCHULABLEND® (ABS/PA) M/MK K2004
制造商:
朗盛工业公司
UV stabilized or stable to weather
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Badalac® ABS/PA 310 TM-Z3 UV
制造商:
巴达克
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
SCHULABLEND® (ABS/PA) M/MK 6501 (ABS+PA6)
制造商:
林德巴塞尔工业公司
Injection Molding
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
SCHULABLEND® ABSPA MMK NC 800
制造商:
None
Increased dimensional stability
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
SCHULABLEND® (ABS/PA) M/MK 6501 U
制造商:
None
U.V. stabilized or stable to weather
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PA6-GF8-SF
制造商:
SCHULABLEND®
M/MK
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
M/MK
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
SCHULABLEND® (ABS/PA) M/MK6101 GF8U (ABS+PA*)-GF8
制造商:
None
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Badalac® ABS/PA 320 GF20 UV
制造商:
None
U.V. stabilized
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
SCHULABLEND® (ABS/PA) M/MK 7102GF20 (ABS+PA6)-GF20
制造商:
None
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
SCHULABLEND® (ABS/PA) M/MK 20 GF
制造商:
None
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 29 materials | Scroll down for more