HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15663 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PC
制造商:
LNP™ ELCRIN™ EXL9414B
medium flow, non-chlorinated, non-brominated, flame retardant, opaque, injection molding (IM) grade, with major component synthesized from Bio source, low temperature ductility (-30°C), thin wall flame retardant capability, excellent processability and release, opportunities for shorter IM cycle times compared to standard PC
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium flow, non-chlorinated, non-brominated, flame retardant, opaque, injection molding (IM) grade, with major component synthesized from Bio source, low temperature ductility (-30°C), thin wall flame retardant capability, excellent processability and release, opportunities for shorter IM cycle times compared to standard PC
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC
制造商:
LNP™ ELCRIN™ EXL9414B
medium flow, non-chlorinated, non-brominated, flame retardant, opaque, injection molding (IM) grade, with major component synthesized from Bio source, low temperature ductility (-30°C), thin wall flame retardant capability, excellent processability and release, opportunities for shorter IM cycle times compared to standard PC
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium flow, non-chlorinated, non-brominated, flame retardant, opaque, injection molding (IM) grade, with major component synthesized from Bio source, low temperature ductility (-30°C), thin wall flame retardant capability, excellent processability and release, opportunities for shorter IM cycle times compared to standard PC
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC
制造商:
None
UV stabilized, medium flow opaque injection molding (IM) grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, medium flow opaque injection molding (IM) grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC
制造商:
LNP™ ELCRES™ EXL9334
UV stabilized, medium flow opaque material, extreme low temperature ductility (-40°C), excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, medium flow opaque material, extreme low temperature ductility (-40°C), excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC
制造商:
None
Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PCW 92A331B TPE
制造商:
None
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PCW 91A701B
制造商:
Dryflex®
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PCW 92A331B
制造商:
德雷弗莱克斯
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC932
制造商:
全球能
No Characteristics
Physical Properties
Density
0.901
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC366-5F
制造商:
None
Low Gel, Homopolymer
Physical Properties
Density
0.902
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Gel, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC366-3
制造商:
全球恩
Homopolymer
Physical Properties
Density
0.902
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC3008
制造商:
None
No Characteristics
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC 59 0 00-037
制造商:
None
Copolymer
Physical Properties
Density
0.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC 78 FRD 3
制造商:
SLOVALEN®
Flame retardant
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC 88 FRD 1
制造商:
None
Injection Molding
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC 78 FRT 5
制造商:
斯洛瓦莱恩
Flame retardant
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC 78 FRD 1
制造商:
None
Flame retardant
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC 26 FRT 5
制造商:
SLOVALEN®
Flame retardant
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC 18 FRT 4
制造商:
斯洛瓦莱恩
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC 18 FRT 5
制造商:
None
Flame retardant
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Total 15663 materials | Scroll down for more