HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1220 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PPA
制造商:
None
Good Adhesion, Low Odor, Low Warpage
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Low Odor, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA 8600
制造商:
Kynar Flex®
Film Extrusion, Sheet Extrusion, Other Extrusion
Physical Properties
Density
0.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Film Extrusion, Sheet Extrusion, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA 2200
制造商:
None
No Characteristics
Physical Properties
Density
0.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPAT011PR012
制造商:
None
No Characteristics
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA TECACOMP® PPA LDS black 4108
制造商:
None
Thermally Conductive
Physical Properties
Density
1.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA 4000
制造商:
RTP
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA RTP 4000 MS
制造商:
None
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA AKROMID® T5 8 black (6454)
制造商:
None
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-MEF(Fe) RTP 4099 X
制造商:
RTP公司
Increased electrical conductivity, High impact or impact
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, High impact or impact
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-MEF(Fe) RTP 4099 X 112302
制造商:
None
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF RTP 4005
制造商:
None
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF RTP 4099 X 113516 A
制造商:
None
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF RTP 4009 A
制造商:
None
No Characteristics
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF
制造商:
LARAMID G/60
No Characteristics
Physical Properties
Density
1.78
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF
制造商:
LARAMID G/45
No Characteristics
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF60 RTP 4011 A
制造商:
None
No Characteristics
Physical Properties
Density
1.75
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF60 Envalior
制造商:
ForTii® Ace MX54B
Heat Stabilized, for Structural Parts
Physical Properties
Density
1.78
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, for Structural Parts
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF
制造商:
LARAMID G/60
No Characteristics
Physical Properties
Density
1.78
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA LGF-1950 HS BK 545-9
制造商:
Xencor™
Injection Molding, Compression Molding, Creep Resistance, Fatigue Resistance, Long fiber reinforced, Low Warpage
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Compression Molding, Creep Resistance, Fatigue Resistance, Long fiber reinforced, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF50_Xencor™ PPA LGF-1950 HS NT-9
制造商:
None
Injection Molding, Compression Molding Creep Resistance, Fatigue Resistance, Long fiber reinforced, Low Warpage
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Compression Molding Creep Resistance, Fatigue Resistance, Long fiber reinforced, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Total 1220 materials | Scroll down for more