HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
TPU 65D 8113 GF20 TPU-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU-CF30_XECARB® 7-C30-D14
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2382 A TPU-CF15
Manufacturer:
RTP
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2383 C TPU-CF20
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU-CF30_XECARB® 7-C30-D16-A
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2382 C TPU-CF15
Manufacturer:
Injection Molding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1201 S-65D TPU-GF10
Manufacturer:
RTP
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1201 S-55D TPU-GF10
Manufacturer:
RTP
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2385 A TPU-CF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU-CF20 2383 A
Manufacturer:
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU-GB20 80A 8049 GK20 S1
Manufacturer:
No Characteristics
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2385 C TPU-CF30
Manufacturer:
RTP
No Characteristics
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU 810/1998.1 CF TPU-CF12
Manufacturer:
electrically conductive, reduced surface resistivity
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive, reduced surface resistivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2381 C TPU-CF10
Manufacturer:
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
810/3070.1 CF15 TPU-CF15
Manufacturer:
ALCOM
electrically conductive, reduced surface resistivity
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive, reduced surface resistivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LCF15/LGF35
Manufacturer:
Long fiber reinforced
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 1190 A (TPU-ARET)
Manufacturer:
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 1195 A (TPU-ARET)
Manufacturer:
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® 1185 A (TPU-ARET)
Manufacturer:
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 1185 A (TPU-ARET)
Manufacturer:
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more