HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (4719 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
THERMOLAST® K TC8FLN
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC8FRN
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TC7WEZ-901
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
0.941
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TC8AAZ
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC7MGZ
Manufacturer:
Injection Molding Good Adhesion, Soft Feel
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Good Adhesion, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC7FTZ
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC7HAA
Manufacturer:
Good Adhesion, Low Fogging, Low Odor
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Low Fogging, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TC7HFZ
Manufacturer:
Injection Molding Good Adhesion, Low Fogging, Low Odor
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Good Adhesion, Low Fogging, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC7FEZ
Manufacturer:
Good Adhesion, Low Emission, Low Fogging, Low Odor, Soft Feel
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Low Emission, Low Fogging, Low Odor, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC7AAZ
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TC6TPZ
Manufacturer:
Good Adhesion, Soft Feel
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TC6LEZ
Manufacturer:
Injection Molding Good Adhesion
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC6MLB
Manufacturer:
Good Adhesion, Low Emission, Low Odor, Soft Feel
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Low Emission, Low Odor, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC6EXN
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TC5TPZ
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC5FEZ
Manufacturer:
Injection Molding Good Adhesion, Low Emission, Low Fogging, Low Odor, Soft Feel
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Good Adhesion, Low Emission, Low Fogging, Low Odor, Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC5MLZ
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC5HAZ
Manufacturer:
Good Adhesion, Low Fogging, Low Odor
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Low Fogging, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC5PAZ
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TC4PAN
Manufacturer:
Injection Molding Good Adhesion
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Total 4719 materials | Scroll down for more