HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
TM3MED
Manufacturer:
Adhesion to PP und HDPE, Adapted for injection moulding and extrusion, Very good compression set, sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Physical Properties
Density
0.88
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Adhesion to PP und HDPE, Adapted for injection moulding and extrusion, Very good compression set, sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP7SKZ
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP7VCN
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® M TM3RST TPE
Manufacturer:
Injection Molding, Other Extrusion Medical Grade, Biocompatibility
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion Medical Grade, Biocompatibility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP9LDZ
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP8CDB
Manufacturer:
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TP9CDB
Manufacturer:
No Characteristics
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP6SKZ
Manufacturer:
Good Adhesion, Weldable
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP6HPN
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TP6CDB
Manufacturer:
Good Adhesion, Weldable
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TP5CDZ
Manufacturer:
Good Adhesion, Weldable
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP5SKZ
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TP6CDZ
Manufacturer:
Good Adhesion, Weldable
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TP5HPG
Manufacturer:
Good Adhesion, Weldable
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP5VCN
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP5CDE
Manufacturer:
Good Adhesion, Weldable
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP3CDZ
Manufacturer:
Good Adhesion, Weldable
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TF9WKF
Manufacturer:
No Characteristics
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOLAST® K TP0LDZ
Manufacturer:
No Characteristics
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TP3LDZ
Manufacturer:
No Characteristics
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more