HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8369 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
HAM8541 (PMMA+ABS)
制造商:
None
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HAM8580 (PMMA+ABS)
制造商:
None
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Biolloy KG330 (PLA+ABS)
制造商:
None
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Biolloy KH420 (PLA+ABS)
制造商:
None
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PLA-55H
制造商:
None
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Biolloy KF1380 (PLA+ABS)
制造商:
None
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
KG320
制造商:
Biolloy
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Biolloy KF1380 (PLA+ABS)
制造商:
None
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
P84®UHT
制造商:
埃文凯克
High temperature resistance, unfilled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, processing by hot compression molding
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High temperature resistance, unfilled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, processing by hot compression molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ACCULOY™ PCA083L (PET+ABS)
制造商:
None
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FABS 23-D022
制造商:
None
No Characteristics
Physical Properties
Density
0.923
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
E FABS 23-D006
制造商:
马莱
Low Gel, Melt Strength, Tribologic Grade
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Gel, Melt Strength, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FABS 27-D022
制造商:
None
No Characteristics
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD_Malen E FABS 27-D022
制造商:
None
Low Gel, Tribologic Grade
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Gel, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD_Malen E FABS 23-D006
制造商:
None
Blown Film Extrusion, Blow Molding
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blown Film Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD_Malen E FABS 23-D022
制造商:
None
Low Gel, Tribologic Grade
Physical Properties
Density
0.923
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Gel, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LV-2250Y
制造商:
潘力特
{'MFR': '8 cm³/10min', 'MVR': '8 cm³/10min', 'Mold_Shrinkage_MD': '0.006 mm/mm', 'Mold_Shrinkage_TD': '0.006 mm/mm', 'Tensile_Modulus': '2400 MPa', 'Yield_stress': '61 MPa', 'Yield_strain': '6 %', 'Nominal_strain_at_break': '>50 %', 'Flexural_modulus_23°C': '2300 MPa', 'Flexural_strength': '91 MPa', 'Charpy_impact_strength_+23°C': 'N kJ/m²', 'Charpy_notched_impact_strength_+23°C': '76 kJ/m²', 'Izod_impact_notched_1/8_in': '880 J/m', 'Izod_impact_notched_1/4_in': '140 J/m', 'Temp_of_deflection_under_load_1.80 MPa': '129 °C', 'Temp_of_deflection_under_load_0.45 MPa': '142 °C', 'Vicat_softening_temperature_B': '149 °C', 'Coeff_of_linear_therm_expansion_parallel': '70 E-6/K', 'Coeff_of_linear_therm_expansion_normal': '70 E-6/K', 'Density': '1200 kg/m³', 'Water_Absorption_Equilibrium': '0.2 %'}
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'MFR': '8 cm³/10min', 'MVR': '8 cm³/10min', 'Mold_Shrinkage_MD': '0.006 mm/mm', 'Mold_Shrinkage_TD': '0.006 mm/mm', 'Tensile_Modulus': '2400 MPa', 'Yield_stress': '61 MPa', 'Yield_strain': '6 %', 'Nominal_strain_at_break': '>50 %', 'Flexural_modulus_23°C': '2300 MPa', 'Flexural_strength': '91 MPa', 'Charpy_impact_strength_+23°C': 'N kJ/m²', 'Charpy_notched_impact_strength_+23°C': '76 kJ/m²', 'Izod_impact_notched_1/8_in': '880 J/m', 'Izod_impact_notched_1/4_in': '140 J/m', 'Temp_of_deflection_under_load_1.80 MPa': '129 °C', 'Temp_of_deflection_under_load_0.45 MPa': '142 °C', 'Vicat_softening_temperature_B': '149 °C', 'Coeff_of_linear_therm_expansion_parallel': '70 E-6/K', 'Coeff_of_linear_therm_expansion_normal': '70 E-6/K', 'Density': '1200 kg/m³', 'Water_Absorption_Equilibrium': '0.2 %'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RMMB 40400
制造商:
None
Halogen-free flame retardant high impact ABS-PC blend
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Halogen-free flame retardant high impact ABS-PC blend
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC+ABS)-X20
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
SCHULABLEND® (PC/ABS) M/MB 5 GF 5
制造商:
None
Platable
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Platable
Recorded properties are for screening; verify source data and conditions.
Total 8369 materials | Scroll down for more