HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
2500 TFE 15 FR (PC+ABS+PTFE)
Manufacturer:
Flame retardant
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Etoma™ ET4102 (PC+ABS)-CD
Manufacturer:
Increased electrical conductivity, Heat stabilized or stable to Europe, Asia Pacific
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Heat stabilized or stable to Europe, Asia Pacific
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ColorFast® JCT1000 (PC+ABS+SMAH)
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2582 HEC FR
Manufacturer:
Increased electrical conductivity, Flame retardant
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ESD 2581 (PC+ABS)-CF10
Manufacturer:
Increased electrical conductivity
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-ABS 1420 (PC+ABS)-CD
Manufacturer:
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
JK2500
Manufacturer:
LEXAN™
Electrically Conductive, EMI/RFI Shielding Effectiveness of 21 dB at 1.5 mm
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, EMI/RFI Shielding Effectiveness of 21 dB at 1.5 mm
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ESD 2582 (PC+ABS)-CF15
Manufacturer:
Increased electrical conductivity
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM WP PC+ABS 5005 TFUV 16151 (PC+ABS+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM WP PC+ABS 5008 TFUV 17009 (PC+ABS+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SR8338
Manufacturer:
High Strength, Good Processability, Enhanced Scratch resistance
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Strength, Good Processability, Enhanced Scratch resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ STAT-KON™ Compound WD000
Manufacturer:
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound WF006XXP
Manufacturer:
Notched Impact Strength, Izod Impact Strength, Tensile Modulus, Tensile Strength, Strain at Break, Flexural Modulus, Charpy Impact Strength, Rockwell Hardness, Thermal Conductivity, Vicat Softening Temperature, Burning behav. at thickness, Glow Wire Flammability Index, Glow Wire Ignition Temperature, DTUL, Vicat Temperature, Relative permittivity, Dissipation factor, Volume resistivity, Surface resistivity, Electric strength, Comparative tracking index, Dielectric Strength, Humidity absorption, Density
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Notched Impact Strength, Izod Impact Strength, Tensile Modulus, Tensile Strength, Strain at Break, Flexural Modulus, Charpy Impact Strength, Rockwell Hardness, Thermal Conductivity, Vicat Softening Temperature, Burning behav. at thickness, Glow Wire Flammability Index, Glow Wire Ignition Temperature, DTUL, Vicat Temperature, Relative permittivity, Dissipation factor, Volume resistivity, Surface resistivity, Electric strength, Comparative tracking index, Dielectric Strength, Humidity absorption, Density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WDF40RID PBT-GF20
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Radar Absorbing, higher flowability, better warpage control
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing, higher flowability, better warpage control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WDF40RID PBT-GF20
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Radar Absorbing, higher flowability, better warpage control
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing, higher flowability, better warpage control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SCHULADUR® A3 GF 30 K2224 (PBT+ASA)-GF30
Manufacturer:
Injection Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CY8000-20GF/000 NC003 (PBT+ASA)-GF20
Manufacturer:
Edgetek™
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUMAX GN5006FC (PBT+ABS)
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HAB8740 (PBT+ABS)
Manufacturer:
Injection Molding
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HAB8750 (PBT+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more