HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5377 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 4306
制造商:
塞拉尼斯
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 5300-2
制造商:
赛兰尼斯
Improved surface finish, Internal lubricant
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved surface finish, Internal lubricant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 4300
制造商:
塞拉尼斯
Toughened
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Toughened
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 4302
制造商:
塞拉尼斯
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 4300LM
制造商:
赛奥莱斯
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 733LD
制造商:
赛兰尼斯
Injection Molding
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3316
制造商:
Celanese
Non-exuding flame retarded
Physical Properties
Density
1.66
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-exuding flame retarded
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3315-16
制造商:
塞拉尼斯
Flame retarded
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retarded
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3300D
制造商:
塞拉尼斯
General purpose
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3309HR
制造商:
赛兰尼斯
Hydrolytically Stable
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30 CELANEX® 3309HRT
制造商:
赛兰尼斯
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3300SW1
制造商:
赛兰
No Characteristics
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3315-04
制造商:
塞拉尼斯
Flame retarded, 30% glass fiber reinforced
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retarded, 30% glass fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30 CELANEX® 3300LM
制造商:
塞拉尼斯
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3300FC
制造商:
Celanese
general purpose
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
general purpose
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3300-2
制造商:
赛兰尼斯
General purpose, high flow material with internal lubricant
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose, high flow material with internal lubricant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30 Celanex® 3300
制造商:
赛兰尼斯
High flow material, Good chemical resistance
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow material, Good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3316A
制造商:
赛兰尼斯
Injection Molding
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3309HRLM
制造商:
赛兰尼斯
Injection Molding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PBT-GF30_CELANEX® 3309HRHF
制造商:
赛兰
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 5377 materials | Scroll down for more