HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (28359 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PP-T16_INNOPOL® CS 3-9120 SR5 BU
Manufacturer:
Blend of polypropylene block-copolymer and homo-polymer.
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blend of polypropylene block-copolymer and homo-polymer.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18_Hifax TRC 103P 11BK03
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Karilen-PR XB 8916 TUSR
Manufacturer:
U.V. stabilized or stable to weather, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18
Manufacturer:
Low Emission, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Emission, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T17 ISOFIL® MZ 3506Y
Manufacturer:
Low Emission, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Emission, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_SCOLEFIN® 62 T 25
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T18
Manufacturer:
Low Emission, Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Emission, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T17_Hifax TYC 1123P E C11538
Manufacturer:
Copolymer
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T17_Hifax TYC 1123X E BLACK
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16 ISOFIL® MF 3604Y
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T17_Hostacom TRC 411N
Manufacturer:
Low Emission, Low Odor, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Emission, Low Odor, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T17
Manufacturer:
Homopolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_INSPIRE™ TF1305 SC
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hostacom EKC 330N E1 G72758
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Low Odor, Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Low Odor, Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hostacom EKC 330N E1 D7V721
Manufacturer:
Non Blooming, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hostacom EKC 330N E1 G62514
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hostacom EKC 330N E1 G12882
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hostacom EKC 330N E1 D62A06
Manufacturer:
Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Tisoplen® C 15D01 K02 F01 Y03 HS R10
Manufacturer:
Injection Molding Homopolymer
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T16_Hostacom CR 250 FM HG2 C12541
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 28359 materials | Scroll down for more