HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (28359 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PP 2130 F30 90/04
Manufacturer:
Copolymer
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30 RTP 132
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30 SCOLEFIN® 13 T 23-9
Manufacturer:
Copolymer
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 2130 F30 70/15
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPC350M6BK11
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_POLYfill PPH S4030
Manufacturer:
Injection Molding Homopolymer
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 2130 F30
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_POLYfill PP CQX10030E10
Manufacturer:
Injection Molding Scratch Resistant
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_Nilflex 8 K30T
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_ISPLEN® PM364 AT
Manufacturer:
Heat stabilized or stable to heat, Low Warpage, Copolymer
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Low Warpage, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_Nilflex 15 K30TC
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_POLIFOR® C1 TR/30
Manufacturer:
Copolymer
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_MB352WG
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_FINALLOY® EBP-831 OK1 S4
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_ISPLEN® PC372 AV
Manufacturer:
Anti-static, High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti-static, High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30 INNOPOL® CS 1-7760 FR
Manufacturer:
Flame retardant
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30FINALLOY®EBP-830
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30
Manufacturer:
Copolymer
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-MX30_FINALLOY® EBP-831 UC9B9
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Total 28359 materials | Scroll down for more