HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PAT302G50BK10 PA*-GF50
Manufacturer:
semi-crystalline Polyamide with partially aromatic copolyamide
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
semi-crystalline Polyamide with partially aromatic copolyamide
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF50_PLASTRON® LFT PAX-GF50-02(L9) PA*-GF50
Manufacturer:
Injection Molding
Physical Properties
Density
1.64
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA*-GF50 RTP 4409
Manufacturer:
No Characteristics
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF50_Grivory GVL-5H HP black 9915/1
Manufacturer:
EMS-GRIVORY
Heat stabilized or stable to heat
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA*-GF50 EMS-GRIVORY
Manufacturer:
EMS-GRIVORY
Improved flowability and demoulding, Improved heat resistance
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved flowability and demoulding, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF50_CELANYL® XS3 GF50 NC 1102/J
Manufacturer:
High stiffness, high strength, stable after conditioning, better creep behavior, dimensional stability, lower warpage, excellent surface finish
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High stiffness, high strength, stable after conditioning, better creep behavior, dimensional stability, lower warpage, excellent surface finish
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF50_CELANYL® XS3 GF50 NC 1102/J
Manufacturer:
High stiffness, high strength, stable after conditioning, good creep behavior, excellent dimensional stability, lower warpage, excellent surface finish
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High stiffness, high strength, stable after conditioning, good creep behavior, excellent dimensional stability, lower warpage, excellent surface finish
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-50GF/000 BK004 PA*-GF50
Manufacturer:
No Characteristics
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA*-GF45 RTP 4408 L
Manufacturer:
No Characteristics
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF45 RTP 4408 HS L
Manufacturer:
No Characteristics
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA*-GF40 SUPRAN® PA1340
Manufacturer:
Creep Resistance, Long fiber reinforced
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF45_Grivory HT XE 10828 black 9225
Manufacturer:
EMS-GRIVORY
HT XE
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
HT XE
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA*-GF40 RTP 4407
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF45 Grivory HT XE 10828 black 9225
Manufacturer:
EMS-GRIVORY
black
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF40_CELANYL® XS3 GF40 TF10 NC 1102/A
Manufacturer:
Tribological Grade, Creep Resistance, Low Warpage
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribological Grade, Creep Resistance, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF40_CELANYL® XS3 GF40 NC 1102/V
Manufacturer:
High stiffness and strength, stable after conditioning, better creep behavior and dimensional stability, lower warpage, excellent surface finish
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High stiffness and strength, stable after conditioning, better creep behavior and dimensional stability, lower warpage, excellent surface finish
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF40_CELANYL® XS3 GF40 NC 1102/V
Manufacturer:
Celanese
High stiffness and strength, stable after conditioning, better creep behavior and dimensional stability vs. an equivalent PA66 grade, lower warpage, excellent surface finish
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High stiffness and strength, stable after conditioning, better creep behavior and dimensional stability vs. an equivalent PA66 grade, lower warpage, excellent surface finish
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF40 10129 black 9205
Manufacturer:
EMS-GRIVORY
PA-GF40
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
PA-GF40
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-GF40_CELANYL® XS3 GF40 TF10 NC 1102/A
Manufacturer:
Celanese
Tribological Grade, Low Warpage, Creep Resistance
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribological Grade, Low Warpage, Creep Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA*-GF35 RTP 4406
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more