HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1334 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA12_Ubesta P3014 U
制造商:
优贝斯特
Heat stabilized or stable to heat
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_Ubesta 3030 JI7
制造商:
优必胜
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_Ubesta 3035 LU 1
制造商:
优尼派克
No Characteristics
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12 Trilliant™ HC HC6200-5002 XR Grey
制造商:
艾文特公司
No Characteristics
Physical Properties
Density
8.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_Rilsamid® AMNO
制造商:
ARKEMA
Injection Molding
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_Rilsamid® AMN BLACK T6LD
制造商:
ARKEMA
Injection Molding
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12 ARVO 950 TLD
制造商:
Revolve
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12 ARVO 950 TLD
制造商:
None
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_PALMID® PA R 12 E
制造商:
None
No Characteristics
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_PALMID® R 12 E L
制造商:
None
No Characteristics
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_FORMPOLY N12FX20
制造商:
None
High impact or impact modified
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_FIL-A-GEHR
制造商:
Gehr GmbH
High impact or impact modified, Good Adhesion, Low Odor
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Good Adhesion, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_DAIAMID® X1988
制造商:
None
No Characteristics
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12 DAIAMID® L1940W
制造商:
戴思尔-伊诺基有限公司
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12 H UV_AG_1
制造商:
Badamid
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12 H UV EX S2
制造商:
巴达公司
No Characteristics
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_AUROmid® PA12 TR55 natural 1102
制造商:
None
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_AUROmid® PA12 TR90 black 9005
制造商:
None
Injection Molding General Chemical Resistance, Oil Resistance
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding General Chemical Resistance, Oil Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12_AUROmid® PA12 TR55 black 9005
制造商:
None
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA12 H UV_AG
制造商:
None
No Characteristics
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 1334 materials | Scroll down for more