HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (4718 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
TPE ProvaMed® 1180
制造商:
None
Medical Grade, Biocompatibility
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medical Grade, Biocompatibility
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE 360
制造商:
None
No Characteristics
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE ProvaMed® 1150
制造商:
None
Injection Molding Medical Grade, Biocompatibility
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Medical Grade, Biocompatibility
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Prime Tuff TX 301
制造商:
None
Thermoforming
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermoforming
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z606
制造商:
None
U.V. stabilized or stable to weather
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE ZC100 D40_AB
制造商:
Polykemi AB
Injection Molding
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z600_AB
制造商:
None
No Characteristics
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z800 SHF_AB
制造商:
None
Injection Molding, Granules, U.V. stabilized or stable to weather, Ozone Resistance
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Granules, U.V. stabilized or stable to weather, Ozone Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z800_AB
制造商:
Polykemi AB
Injection Molding
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z700_AB
制造商:
Polykemi AB
Injection Molding
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z600P_AB
制造商:
None
Injection Molding, Granules, U.V. stabilized or stable to weather, Good Adhesion, Chemical Resistance, Ozone Resistance
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Granules, U.V. stabilized or stable to weather, Good Adhesion, Chemical Resistance, Ozone Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z650A
制造商:
None
No Characteristics
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z900_AB
制造商:
None
Injection Molding
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE ZS2606_AB
制造商:
None
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z706EX_AB
制造商:
None
Injection Molding, Granules, U.V. stabilized or stable to weather, Ozone Resistance
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Granules, U.V. stabilized or stable to weather, Ozone Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE ZS606_AB
制造商:
Polykemi AB
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z805P
制造商:
None
U.V. stabilized or stable to weather
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE ZS506
制造商:
None
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE ZS706_AB
制造商:
None
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TPE Z706
制造商:
None
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 4718 materials | Scroll down for more