HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3603 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound KL004U
制造商:
None
Wear Resistant, UV Stabilized
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, UV Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound KL004A
制造商:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound KL004
制造商:
LNP
Wear Resistant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
KL004A
制造商:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
KL004L
制造商:
沙特基础工业公司
Wear Resistant, Low Extractable
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Low Extractable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound KL003LH
制造商:
沙特基础工业公司
低可萃取, 医疗, 耐磨
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
低可萃取, 医疗, 耐磨
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
KL004L
制造商:
沙特基础工业公司
Wear Resistant, Low Extractable
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Low Extractable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
KL004
制造商:
LNP LUBRICOMP
Wear Resistant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
KL004
制造商:
LNP LUBRICOMP
Wear Resistant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound KL003LH
制造商:
LNP™
Low Extractable, Healthcare, Wear Resistant
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Extractable, Healthcare, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 9021 TF
制造商:
塞拉尼斯
good chemical resistance, high resistance to thermal and oxidative degradation, very low coefficient of friction
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good chemical resistance, high resistance to thermal and oxidative degradation, very low coefficient of friction
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 9021 TF
制造商:
赛兰尼斯
good chemical resistance, high resistance to thermal and oxidative degradation, very low coefficient of friction
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good chemical resistance, high resistance to thermal and oxidative degradation, very low coefficient of friction
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Iupital FL2020 (POM+PTFE)
制造商:
三菱工程塑料株式会社
Injection Molding
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EPIMIX POM PTFE 10 NC Q1D001
制造商:
None
No Characteristics
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ESD 800 TFE 5
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
M 00U 4TF
制造商:
德尼鲁布
Lubricants
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM WP POM 5020 TF 18029
制造商:
None
improved sliding / wear
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM 770/1 PTFE15
制造商:
ALCOM
improved sliding / wear
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
C110 TF20
制造商:
巴达福姆
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM POM 770/1 PTFE10
制造商:
None
heat stabilised,easy release (demoulding),improved sliding / wear
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Total 3603 materials | Scroll down for more