HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66 HGF30 black 9005
Manufacturer:
AUROmid
Heat stabilized
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6.6 350-H/GF30 PA66-GF30
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6.6 355-H/GF30 PA66-GF30
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 HHGF30 black 9005
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030/109 GF30
Manufacturer:
heat stabilised,easy release (demoulding),easy flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030/588 GF30
Manufacturer:
ALTECH
heat stabilised,hot oil resistant,easy release (demoulding),good flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,hot oil resistant,easy release (demoulding),good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 910_1 GF30 MO2
Manufacturer:
improved sliding / wear,heat stabilised
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Alamid® 6.6 GF 30 MOD WL schwarz-9665
Manufacturer:
Thermally Conductive
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 A3 GF 30 FR orange (7871)
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_AKROMID® A3 GF 30 HU natural 6661
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 A3 GF 30 S1 black (5947)
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 A3 GF 30 natural (2397)
Manufacturer:
Injection Molding
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 AKROMID® A3 GF 30 S1 black 3723
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_AKROMID® A3 GF 30 S1 natural 3695
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_AKROMID® A3 GF 30 HU black 6567
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 A3 GF 30 HU black (6567)
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 A3 GF 30 natural 2436
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 AKROMID® A3 GF 30 FR EN black 6654
Manufacturer:
Injection Molding RoHS compliant
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 AKROMID® A3 GF 30 black 2428
Manufacturer:
Injection Molding Automotive
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 A3 GF 30 4 black
Manufacturer:
Injection Molding
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more