HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
R530H NAT
Manufacturer:
heat-stabilized, high viscosity
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat-stabilized, high viscosity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R530H NT
Manufacturer:
Heat-stabilized
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat-stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R530HT BK02
Manufacturer:
Heat-stabilized, Black
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat-stabilized, Black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
643HW PA66-GF30
Manufacturer:
WARPI A X
Low Warpage
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Wellamid® GF1398-BK1 PA66-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Vydyne® R530 NAT PA66-GF30
Manufacturer:
Ascend
General Purpose, High Viscosity, Standard Flow, Natural Surface Finish, Excellent Resistance
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Purpose, High Viscosity, Standard Flow, Natural Surface Finish, Excellent Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_Vydyne® A 30 GF NT WR
Manufacturer:
standard flow, 30% glass-fiber reinforced
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow, 30% glass-fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A 30 GF BK EST KW2 UV
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VLF 80205 EM HS PA66-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2300GF PA66-GF30
Manufacturer:
Titalon
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2300XGF PA66-GF30
Manufacturer:
Increased electrical conductivity, Thermally Conductive
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Titalon 2300GFT PA66-GF30
Manufacturer:
Glass Fiber Reinforced
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Glass Fiber Reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
B 30D03 K06 R01
Manufacturer:
Tisan Engineering Plastics Co.Ltd.
Hydrolytically Stable
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Tislamid® B 30D03 K05 R01
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
B 30D03 K02 F01 Y01 HS R02
Manufacturer:
Tisan Engineering Plastics Co.Ltd.
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
B 30D03 F01 Y01 HS K02 R01
Manufacturer:
Tisan Engineering Plastics Co.Ltd.
Flame retardant
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GT3 300 H G30 UV
Manufacturer:
heat stabilization and UV stabilization
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilization and UV stabilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Tislamid® B 30D03 K04 R01
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 7750 T GF 30
Manufacturer:
Dry impact resistant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dry impact resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TEREZ® AE 400 H G30 PA66-GF30
Manufacturer:
Medium viscosity, heat stabilised, high sustainability due to recycled raw materials
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity, heat stabilised, high sustainability due to recycled raw materials
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more